mem_join=1 on cfg. MEMDBG=0 on makefile.def
On Mon, Nov 25, 2013 at 10:40 PM, Daniel-Constantin Mierla < mico...@gmail.com> wrote: > Hello, > > are you still using mem_join=1? > > Cheers, > Daniel > > > On 11/24/13 10:01 AM, Uri Shacked wrote: > > Hi, > > It has been a while. > > Still, I have some problems with reloading data into shared memory. > > I can obviously notice that there is always an increase of shmem after > each reload. > > > > When my system starts, it has 4G of memory reserved and approximately 0.8G > is populated at start. > > > > After 30 days, when reloading 15-25 times per day only part of the 0.8G, > the shmem size is approximately 3.5G. > > > > As I mentioned before, the traffic does not seems to be the issue. How do > I, or can I, check the size of memory occupied by traffic only? > > > > Any ideas how to handle the reloads? > > > > I am using kamailio 3.3.2 with modules like ACC, DIALOG, CARRIERROUTE and > more…. > > > > > > Thanks, > > BR, > > Uri > > > On Sun, Mar 3, 2013 at 7:36 PM, Uri Shacked <ushac...@gmail.com> wrote: > >> >> Hi, >> >> I have this memory issue again. >> >> The status now is that I compiled kamailio as followed here and use >> mem_join=1. >> >> I reload my data from DB every minute! I know i reload a lot, will take >> care of that (will update you all on April :-)). >> >> When kamailio starts the shmem is about 17% of 4Gb and after 7 days (600 >> reloads per day) the shmem is about 24%. >> >> The traffic is not the issue. >> >> Still, can defrag of memory improve? Ideas for defrag? >> >> Thanks, >> >> Uri >> >> On Tue, Nov 27, 2012 at 12:37 PM, Uri Shacked <ushac...@gmail.com>wrote: >> >>> >>> OK >>> >>ok - it's 56sec or 36sec? >>> It was 56 sec. >>> >>> Now, after recompile, when cfg mem_join=0 the reload takes 8 sec and the >>> shmem real used is 25% of 4Gb. >>> When mem_join=, the reload take 30 sec and the shmem real used is 17%. >>> >>> >>> Looks good with mem_join=1. >>> >>> Thanks, >>> Uri >>> >> > -- > Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda > - http://www.linkedin.com/in/miconda > >
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
