Hello,

On 11/14/13 9:37 PM, jonathan augenstine wrote:
Daniel,

I found this link: http://sip-router.org/tracker/index.php?do=details&task_id=310.

it is the same link I provided in my previous email. There is mentioned that acctserver was not set in radius config. Have set acctserver?

Cheers,
Daniel

The core file output is below. I see that it is in the libradiusclient-ng.so library, but is there a solution, change the config file, different version library, etc?

Jonathan

Core was generated by `/usr/local/sbin/kamailio -P /var/run/kamailio.pid -f /usr/local/etc/kamailio//k'.
Program terminated with signal 11, Segmentation fault.
#0 0x00007f009ab0aa5d in rc_read_config () from /usr/lib/libradiusclient-ng.so.2
(gdb) backtrace
#0 0x00007f009ab0aa5d in rc_read_config () from /usr/lib/libradiusclient-ng.so.2 #1 0x00007f009ad159d9 in init_acc_rad () from /usr/local/lib64/kamailio/modules/acc.so #2 0x00007f009ad216e5 in mod_init () from /usr/local/lib64/kamailio/modules/acc.so
#3  0x0000000000510851 in init_mod ()
#4  0x0000000000516112 in init_modules ()
#5  0x000000000041c257 in main () at main.c:2507



On Thu, Nov 14, 2013 at 1:06 AM, Daniel-Constantin Mierla <mico...@gmail.com <mailto:mico...@gmail.com>> wrote:


    On 11/14/13 10:02 AM, Daniel-Constantin Mierla wrote:
    Hello,

    On 11/14/13 4:31 AM, jonathan augenstine wrote:
    I am working on the configuration to enable RADIUS in Kamailio
    4.0.  The basic install worked successfully and the daemon
    started without problems.  I then install radiusclient-ng and
    configured RADIUS in the Kamailio build/configuration.  All
    seemed OK until the Kamailio restart and I encountered the
    following error during the restart:

    Nov 13 06:52:23 lax-vproxy2-a kernel: [  348.808624]
    kamailio[5346]: segfault at 0 ip 00007f375d249a5d sp
    00007fff4d42eed0 error 4 in
    libradiusclient-ng.so.2.0.0[7f375d243000+c000]
    Nov 13 06:52:23 lax-vproxy2-a kamailio: ERROR: <core>
    [daemonize.c:307]: daemonize(): Main process exited before
    writing to pipe

    After some research it seemed that others encountered a similar
    error and traced it to the dictionary.  I have gone through the
    dictionary configuration and all seems to be correct.  Any
    guidance on what might be the issue or some troubleshooting steps?
    did you get a core dump? Looking at the backtrace may show where
    is the problem in libradiusclient-ng.
    Just found this one that seems to be similar:

    -
    http://sip-router.org/tracker/index.php?do=details&task_id=310&project=1

    It mentions that acctserver was not set in radius config.


    Cheers,
    Daniel

-- Daniel-Constantin Mierla -http://www.asipto.com
    http://twitter.com/#!/miconda  <http://twitter.com/#%21/miconda>  
-http://www.linkedin.com/in/miconda
    Kamailio Advanced Trainings - Berlin, Nov 25-28
       - more details about Kamailio trainings athttp://www.asipto.com  -


    _______________________________________________
    SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
    list
    sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
    http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Trainings - Berlin, Nov 25-28
  - more details about Kamailio trainings at http://www.asipto.com -

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Reply via email to