I am not sure about your situation, but in my case - Asterisk respond to any message, and wrong paths were corrected the way I showed. By the way - I am using also rtpproxy. Although it should not interfere here at all. I used wireshark on Asterisk and on Kamailio servers to find what exactly happens. The idea is - I check "target" (for ACK and BYE) and if target is Kamailio server, I forward package to Asterisk. As I mentioned - I am not sure what exactly is wrong - with my setup, or Kamailio or Asterisk - but my go around works well for me.
On Fri, Oct 25, 2013 at 7:17 PM, anfecora <anfec...@gmail.com> wrote: > Thank you Stoyan, i tried but i ended up creating a loop with the carrier, > i believe this is more a asterisk receiving the package and ignoring the > record-route and because i am just proxying the signalling it does ack to > the contact, i have to find a way to tell asterisk that answer everything > to kamailio and kamailio must respond to the carrier to the proper to > header i am clueless here, now thinking to install rtpproxy to achieve > that, any other sugestions . > thanks. > > > U 2013/10/23 17:26:16.846067 3.1.1.1:5060 -> 1.1.1.2:5060 > SIP/2.0 200 OK. > Session-Expires: 3600;refresher=uas. > Require: timer. > Via: SIP/2.0/UDP 2.0.0.1:5060;branch=z9hG4bK887c.94fdcd27.0. > Via: SIP/2.0/UDP 1.1.1.1:5060;branch=z9hG4bK4bd52990;rport=5060. > Record-Route: <sip:3.1.1.1;lr;ftag=as4bc322e9;did=8b8.d7ef5a05>. > Record-Route: <sip:2.0.0.1;lr=on;ftag=as4bc322e9>. > To: <sip:76890723276341079@3.1.1.1>;tag=3591552407-393967. > From: "+19812457865" <sip:+19812457865@1.1.1.1>;tag=as4bc322e9. > Call-ID: 7d0ca48c1d48c14d104fac1f59194ae0@1.1.1.1:5060. > CSeq: 102 INVITE. > Allow: INVITE, BYE, OPTIONS, CANCEL, ACK, REGISTER, NOTIFY, INFO, REFER, > SUBSCRIBE, PRACK, UPDATE. > Contact: <sip:76890723276341079@3.1.1.2:5060>. > Call-Info: > <sip:3.1.1.2>;method="NOTIFY;Event=telephone-event;Duration=1000". > Allow-Events: telephone-event. > Content-Type: application/sdp. > Content-Length: 202. > . > v=0. > o=MSXB 4755 8544 IN IP4 3.1.1.2. > s=sip call. > c=IN IP4 204.15.40.111. > t=0 0. > m=audio 33408 RTP/AVP 0 101. > a=rtpmap:0 PCMU/8000. > a=rtpmap:101 telephone-event/8000. > a=fmtp:101 0-16. > a=ptime:20. > > > U 2013/10/23 17:26:16.846201 1.1.1.2:5060 -> 1.1.1.1:5060 > SIP/2.0 200 OK. > Session-Expires: 3600;refresher=uas. > Require: timer. > Via: SIP/2.0/UDP 1.1.1.1:5060;branch=z9hG4bK4bd52990;rport=5060. > Record-Route: <sip:3.1.1.1;lr;ftag=as4bc322e9;did=8b8.d7ef5a05>. > Record-Route: <sip:2.0.0.1;lr=on;ftag=as4bc322e9>. > To: <sip:76890723276341079@3.1.1.1>;tag=3591552407-393967. > From: "+19812457865" <sip:+19812457865@1.1.1.1>;tag=as4bc322e9. > Call-ID: 7d0ca48c1d48c14d104fac1f59194ae0@1.1.1.1:5060. > CSeq: 102 INVITE. > Allow: INVITE, BYE, OPTIONS, CANCEL, ACK, REGISTER, NOTIFY, INFO, REFER, > SUBSCRIBE, PRACK, UPDATE. > Contact: <sip:76890723276341079@3.1.1.2:5060>. > Call-Info: > <sip:3.1.1.2>;method="NOTIFY;Event=telephone-event;Duration=1000". > Allow-Events: telephone-event. > Content-Type: application/sdp. > Content-Length: 202. > . > v=0. > o=MSXB 4755 8544 IN IP4 3.1.1.2. > s=sip call. > c=IN IP4 204.15.40.111. > t=0 0. > m=audio 33408 RTP/AVP 0 101. > a=rtpmap:0 PCMU/8000. > a=rtpmap:101 telephone-event/8000. > a=fmtp:101 0-16. > a=ptime:20. > > > T 2013/10/23 17:26:16.846287 1.1.1.2:55305 -> 10.0.3.54:3306 [AP] > .....insert into acc > (method,from_tag,to_tag,callid,sip_code,sip_reason,time,from_uri,to_uri,kekuintid,type_call,dst_ip,carriercode,callmode > ) values ('INVITE','as4bc322e9','3591552407-393967',' > 7d0ca48c1d48c14d104fac1f59194ae0@1.1.1.1:5060','200','OK','2013-10-23 > 17:26:16','sip:+19812457865@1.1.1.1','sip:23276341079@2.0.0.1 > ','+19812457865','1.1.1.1','sip:76890723276341079@3.1.1.1:5060',' > sip:23276341079@2.0.0.1','OUT') > > U 2013/10/23 17:26:16.847421 1.1.1.1:5060 -> 1.1.1.2:5060 > ACK sip:76890723276341079@3.1.1.2:5060 SIP/2.0. > Via: SIP/2.0/UDP 1.1.1.1:5060;branch=z9hG4bK05b1c5df;rport. > Route: > <sip:2.0.0.1;lr=on;ftag=as4bc322e9>,<sip:3.1.1.1;lr;ftag=as4bc322e9;did=8b8.d7ef5a05>. > Max-Forwards: 70. > From: "+19812457865" <sip:+19812457865@1.1.1.1>;tag=as4bc322e9. > To: <sip:23276341079@2.0.0.1>;tag=3591552407-393967. > Contact: <sip:+19812457865@1.1.1.1:5060>. > Call-ID: 7d0ca48c1d48c14d104fac1f59194ae0@1.1.1.1:5060. > CSeq: 102 ACK. > User-Agent: Asterisk PBX 1.8.15-cert2. > Content-Length: 0. > . > > > On Thu, Oct 24, 2013 at 12:59 PM, Stoyan Mihaylov < > stoyan.v.mihay...@gmail.com> wrote: > >> I had same problem - with BYE also. >> My "go around" was (replaced name of domain and IP of kamailio): >> >> route[ACKBYE] { >> #!ifdef WITH_MYFORWARD >> if(($sht(forw=>$ft))=~$td){ >> $du=$sht(forw=>$ft); >> }else if((($td=="name.of.company.com")||($td=="ip"))&&($si=="ip")){ >> $du=$sht(forw=>$ft); >> return; >> } >> #!endif >> return; >> } >> >> route[PSTNINVITE] { >> #!ifdef WITH_MYFORWARD >> if(is_method("INVITE")){ >> ds_select_dst("1","4"); >> $sht(forw=>$ft)=$du; >> sl_send_reply("100","Trying"); >> route(RELAY); >> exit(); >> } >> #!endif >> >> return; >> } >> >> Meaning - during invite, I store du (to allow more then one Asterisk >> behind kamailio) >> and on ACK or BYE - I check td and si. Not sure I am correct, but it >> works from long time, although load is not high. >> PS >> You will need to set in the beginning >> modparam("htable", "htable", "forw=>size=8;autoexpire=7200;") >> >> and you need to put routes in proper places. >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users@lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > >
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users