Today I compiled and installed your branch from Kamailio repository. Another hope for kickstart was to swap Kamailio inside NGCP: in order to use already working config straight from then authors J But it was figured out that a lot of symbols and funcs are out of place (despite that all necessary modules are compiled). Then I found missing patches at Sipwise repo. But haven't been sure they are needed for the purpose or not.
p.s. Sorry if I'm annoying. Despite a hot set of projects for "WebRTC to SIP" convergence (almost) none of them are stable or working as expected. E.g. Asterisk doesn't (yet) officially support VP8 for B2BUA. And I don't want to involve Asterisk here as well. regards, /A 2013/7/19 Richard Fuchs <rfu...@sipwise.com> > On 07/19/13 14:46, Alexey Rybalko wrote: > > Good! When NGCP 3.0 will be available for the community? > > > > Have we any chance to evaluate media profile conversion(SDP) prior that > > event using base Kamailio? There a several patches from Sipwise for > > Kamailio core and some other modules as well (e.g. nathelper).The only > > examples for new mediaproxy might be found inside SPCE (NGCP), but it's > > config doesn't work without patching the Kamailio sources. > > > You don't have to patch it if you check out the rtpproxy-ng branch from > the Kamailio git repo (or the Sipwise Kamailio repo for that matter), > but you're still gonna have to compile the sources yourself. At this > point, there's no way around that. NGCP 3.0 is on the horizon, but not > quite there yet as there's still some issues that need to be worked out. > > cheers > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > >
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
