Thanks! I am actually taking this opportunity to upgrade to 4.0. Looks
like there is a lot of good stuff here!
On Fri, Jun 28, 2013 at 7:14 AM, I.Pavlov <i...@izhnet.ru> wrote:
> This should work in 1.5:****
>
> *$ct* - reference to body of contact header ****
>
> xlog("CONTCAT: rate=$(ct{param.value,rate})");****
>
> acc_log_request(“RATE: $(ct{param.value,rate})”);****
>
> ** **
>
> ** **
>
> *From:* sr-users-boun...@lists.sip-router.org [mailto:
> sr-users-boun...@lists.sip-router.org] *On Behalf Of *Geoffrey Mina
> *Sent:* Friday, June 28, 2013 4:38 PM
> *To:* Kamailio (SER) - Users Mailing List
> *Subject:* Re: [SR-Users] Consuming 300 Multiple Choices****
>
> ** **
>
> I should have been more clear. I am using Kamailio 1.5. I would consider
> upgrading, but that isn't the ideal path here.****
>
> Any other idea for 1.5?****
>
> ** **
>
> On Fri, Jun 28, 2013 at 12:46 AM, I.Pavlov <i...@izhnet.ru> wrote:****
>
> Hi Geoff, to grab “rate”-attribute try to use
> “$sel(contact.params["rate"]);”-expression. For example, in my test with
> sipp, I used *Contact: sip:sipp@[local_ip]:[local_port];q=0.1;rate=0.002 *and
> ****
>
> ****
>
> $var(rate)=$sel(contact.params["rate"]);****
>
> xlog("CONTACT URI PARAMS: $var(rate)");****
>
> ****
>
> /usr/sbin/kamailio[25909]: ERROR: <script>: CONTACT URI PARAMS: 0.002****
>
> ****
>
> Next, you can try to log $var(rate) with acc like this:
> acc_log_request(“RATE: $var(rate)”);****
>
> ****
>
> -----****
>
> Igor Pavlov****
>
> ****
>
> *From:* sr-users-boun...@lists.sip-router.org [mailto:
> sr-users-boun...@lists.sip-router.org] *On Behalf Of *Geoffrey Mina
> *Sent:* Thursday, June 27, 2013 9:55 PM
> *To:* kamailio
> *Subject:* [SR-Users] Consuming 300 Multiple Choices****
>
> ****
>
> Greetings,****
>
> I am looking for a way to get some extra information out of the Contact
> header when consuming a multiple choices response. I am using uac_redirect
> to populate the branches.
>
> get_redirects("*");
> t_load_contacts();
> t_next_contacts();
>
> t_on_failure("2");
> t_relay();****
>
> In my failure_route[2] I am just doing:****
>
> t_next_contacts();****
>
> t_on_failure("2");
> t_relay();****
>
> In my Multiple Choices packet, I am getting some additional information
> that I would like to log using the acc module. There is a "rate" attribute
> that defines how much the outbound leg is going to cost to terminate. Here
> is how the packet looks:
>
> SIP/2.0 300 Multiple Choices
> Via: SIP/2.0/UDP X.X.X.X;branch=z9hG4bK6213.a6567804.0
> Via: SIP/2.0/UDP X.X.X.X;branch=z9hG4bK6213.a6c73fe6.0
> Via: SIP/2.0/UDP
> X.X.X.X:5060;received=X.X.X.X;branch=z9hG4bK61f266c4;rport=5060
> Contact: <sip:9546496708@X.X.X.X;npdi>;q=0.001;rate=0.002000
> Contact: <sip:9546496708@X.X.X.X;npdi>;q=0.002;rate=0.009850
> Contact: <sip:9546496708@X.X.X.X;npdi>;q=0.003;rate=0.009850
> Contact: <sip:9546496708@X.X.X.X;npdi>;q=0.004;rate=0.009850
> Contact: <sip:9546496708@X.X.X.X;npdi>;q=0.005;rate=0.009850
> Contact: <sip:9546496708@X.X.X.X;npdi>;q=0.006;rate=0.009850
> To: <sip:19546496708@X.X.X.X>
> From: "7203355925" <sip:7203355925@X.X.X.X>;tag=as5927da08
> Call-ID: 3eb09e772e32e18c1fe926230802818c@X.X.X.X
> CSeq: 102 INVITE
> Server: Routing Server
> Content-Length: 0****
>
> How would I grab that attribute and log it using acc?****
>
> Thanks,
> Geoff****
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users****
>
> ** **
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
