http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc#dokuwiki__top
Hello I was trying to use your tutorial on the above page. I am trying to do so using PGQL vs MYSQL. I changed all the mysql parts to pgsql however when i try to start kamailio it fails. I am building the system on alpine linux and attached my kamailio.cfg and kamctlrc. i am able to setup using the default config making necessary changes but when i use yours it fails. Any help would be appreciated. -- Regards, Carlton Thompson, MS Doctoral Student College of Engineering University of Florida Gainesville, FL 32611
#!KAMAILIO #!define WITH_PGSQL #!define WITH_AUTH #!define WITH_USRLOCDB #!define WITH_FREESWITCH # # Kamailio (OpenSER) SIP Server v3.1 - default configuration script # - web: http://www.kamailio.org # - git: http://sip-router.org # # Direct your questions about this file to: <sr-users@lists.sip-router.org> # # Refer to the Core CookBook at http://www.kamailio.org/dokuwiki/doku.php # for an explanation of possible statements, functions and parameters. # # Several features can be enabled using '#!define WITH_FEATURE' directives: # # *** To run in debug mode: # - define WITH_DEBUG # # *** To enable pgsql: # - define WITH_PGSQL # # *** To enable authentication execute: # - enable pgsql # - define WITH_AUTH # - add users using 'kamctl' # # *** To enable IP authentication execute: # - enable pgsql # - enable authentication # - define WITH_IPAUTH # - add IP addresses with group id '1' to 'address' table # # *** To enable persistent user location execute: # - enable pgsql # - define WITH_USRLOCDB # # *** To enable presence server execute: # - enable pgsql # - define WITH_PRESENCE # # *** To enable nat traversal execute: # - define WITH_NAT # - install RTPProxy: http://www.rtpproxy.org # - start RTPProxy: # rtpproxy -l _your_public_ip_ -s udp:localhost:7722 # # *** To enable PSTN gateway routing execute: # - define WITH_PSTN # - set the value of pstn.gw_ip # - check route[PSTN] for regexp routing condition # # *** To enable database aliases lookup execute: # - enable pgsql # - define WITH_ALIASDB # # *** To enable multi-domain support execute: # - enable pgsql # - define WITH_MULTIDOMAIN # # *** To enable TLS support execute: # - adjust CFGDIR/tls.cfg as needed # - define WITH_TLS # # *** To enable XMLRPC support execute: # - define WITH_XMLRPC # - adjust route[XMLRPC] for access policy # # *** To enable anti-flood detection execute: # - adjust pike and htable=>ipban settings as needed (default is # block if more than 16 requests in 2 seconds and ban for 300 seconds) # - define WITH_ANTIFLOOD # # *** To enhance accounting execute: # - enable pgsql # - define WITH_ACCDB # - add following columns to database #!ifdef ACCDB_COMMENT ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; #!endif ####### Defined Values ######### # *** Value defines - IDs used later in config #!ifdef WITH_PGSQL # - database URL - used to connect to database server by modules such # as: auth_db, acc, usrloc, a.s.o. #!define DBURL "pgsql://openser:openserrw@localhost/openser" #!endif #!ifdef WITH_MULTIDOMAIN # - the value for 'use_domain' parameters #!define MULTIDOMAIN 1 #!else #!define MULTIDOMAIN 0 #!endif # - flags # FLT_ - per transaction (message) flags # FLB_ - per branch flags #!define FLT_ACC 1 #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 #!define FLT_NATS 5 #!define FLB_NATB 6 #!define FLB_NATSIPPING 7 ####### Global Parameters ######### #!ifdef WITH_DEBUG debug=4 log_stderror=yes #!else debug=2 log_stderror=no #!endif memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes children=4 /* uncomment the next line to disable TCP (default on) */ #disable_tcp=yes /* uncomment the next line to disable the auto discovery of local aliases based on reverse DNS on IPs (default on) */ #auto_aliases=no /* add local domain aliases */ #alias="sip.mydomain.com" /* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ listen=udp:10.0.0.10:5060 /* port to listen to * - can be specified more than once if needed to listen on many ports */ port=5060 #!ifdef WITH_TLS enable_tls=yes #!endif ####### Custom Parameters ######### # These parameters can be modified runtime via RPC interface # - see the documentation of 'cfg_rpc' module. # # Format: group.id = value 'desc' description # Access: $sel(cfg_get.group.id) or @cfg_get.group.id # #!ifdef WITH_PSTN # PSTN GW Routing # # - pstn.gw_ip: valid IP or hostname as string value, example: # pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" # # - by default is empty to avoid misrouting pstn.gw_ip = "10.0.0.1" desc "PSTN GW Address" #!endif #!ifdef WITH_FREESWITCH freeswitch.bindip = "10.0.0.101" desc "FreeSWITCH IP Address" freeswitch.bindport = "5060" desc "FreeSWITCH Port" #!endif ####### Modules Section ######## # set paths to location of modules #!ifdef LOCAL_TEST_RUN mpath="modules_k:modules" #!else mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/" #!endif #!ifdef WITH_PGSQL loadmodule "db_postgres.so" #!endif loadmodule "mi_fifo.so" loadmodule "kex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "mi_rpc.so" loadmodule "acc.so" loadmodule "uac.so" #!ifdef WITH_AUTH loadmodule "auth.so" loadmodule "auth_db.so" #!ifdef WITH_IPAUTH loadmodule "permissions.so" #!endif #!endif #!ifdef WITH_ALIASDB loadmodule "alias_db.so" #!endif #!ifdef WITH_MULTIDOMAIN loadmodule "domain.so" #!endif #!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" #!endif #!ifdef WITH_NAT loadmodule "nathelper.so" loadmodule "rtpproxy.so" #!endif #!ifdef WITH_TLS loadmodule "tls.so" #!endif #!ifdef WITH_ANTIFLOOD loadmodule "htable.so" loadmodule "pike.so" #!endif #!ifdef WITH_XMLRPC loadmodule "xmlrpc.so" #!endif # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo") # ----- tm params ----- # auto-discard branches from previous serial forking leg modparam("tm", "failure_reply_mode", 3) # default retransmission timeout: 30sec modparam("tm", "fr_timer", 30000) # default invite retransmission timeout after 1xx: 120sec modparam("tm", "fr_inv_timer", 120000) # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- registrar params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # ----- acc params ----- /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) /* enhanced DB accounting */ #!ifdef WITH_ACCDB modparam("acc", "db_flag", FLT_ACC) modparam("acc", "db_missed_flag", FLT_ACCMISSED) modparam("acc", "db_url", DBURL) modparam("acc", "db_extra", "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") #!endif # ----- usrloc params ----- /* enable DB persistency for location entries */ #!ifdef WITH_USRLOCDB modparam("usrloc", "db_url", DBURL) modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", MULTIDOMAIN) #!endif # ----- auth_db params ----- #!ifdef WITH_AUTH modparam("auth_db", "db_url", DBURL) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "load_credentials", "") modparam("auth_db", "use_domain", MULTIDOMAIN) # ----- permissions params ----- #!ifdef WITH_IPAUTH modparam("permissions", "db_url", DBURL) modparam("permissions", "db_mode", 1) #!endif #!endif # ----- alias_db params ----- #!ifdef WITH_ALIASDB modparam("alias_db", "db_url", DBURL) modparam("alias_db", "use_domain", MULTIDOMAIN) #!endif # ----- domain params ----- #!ifdef WITH_MULTIDOMAIN modparam("domain", "db_url", DBURL) # use caching modparam("domain", "db_mode", 1) # register callback to match myself condition with domains list modparam("domain", "register_myself", 1) #!endif #!ifdef WITH_PRESENCE # ----- presence params ----- modparam("presence", "db_url", DBURL) # ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1) #!endif #!ifdef WITH_NAT # ----- rtpproxy params ----- modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") # ----- nathelper params ----- modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) modparam("nathelper", "sipping_from", "sip:pin...@kamailio.org") # params needed for NAT traversal in other modules modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") modparam("usrloc", "nat_bflag", FLB_NATB) #!endif #!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config", "/usr/local/etc/kamailio/tls.cfg") #!endif #!ifdef WITH_ANTIFLOOD # ----- pike params ----- modparam("pike", "sampling_time_unit", 2) modparam("pike", "reqs_density_per_unit", 16) modparam("pike", "remove_latency", 4) # ----- htable params ----- # ip ban htable with autoexpire after 5 minutes modparam("htable", "htable", "ipban=>size=8;autoexpire=300;") #!endif #!ifdef WITH_XMLRPC # ----- xmlrpc params ----- modparam("xmlrpc", "route", "XMLRPC"); modparam("xmlrpc", "url_match", "^/RPC") #!endif ####### Routing Logic ######## # Main SIP request routing logic # - processing of any incoming SIP request starts with this route route { # per request initial checks route(REQINIT); # NAT detection route(NAT); # handle requests within SIP dialogs route(WITHINDLG); ### only initial requests (no To tag) # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); # authentication route(AUTH); # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(FLT_ACC); # do accounting } # dispatch requests to foreign domains route(SIPOUT); ### requests for my local domains # handle presence related requests route(PRESENCE); # handle registrations route(REGISTRAR); if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # dispatch destinations to PSTN route(PSTN); #!ifdef WITH_FREESWITCH # save callee ID $avp(callee) = $rU; route(FSDISPATCH); #!endif # user location service route(LOCATION); route(RELAY); } route[RELAY] { #!ifdef WITH_NAT if (check_route_param("nat=yes")) { setbflag(FLB_NATB); } if (isflagset(FLT_NATS) || isbflagset(FLB_NATB)) { route(RTPPROXY); } #!endif #!ifdef WITH_CFGSAMPLES /* example how to enable some additional event routes */ if (is_method("INVITE")) { #t_on_branch("BRANCH_ONE"); t_on_reply("REPLY_ONE"); t_on_failure("FAIL_ONE"); } #!endif if (!t_relay()) { sl_reply_error(); } exit; } # Per SIP request initial checks route[REQINIT] { #!ifdef WITH_ANTIFLOOD # flood dection from same IP and traffic ban for a while # be sure you exclude checking trusted peers, such as pstn gateways # - local host excluded (e.g., loop to self) if(src_ip!=myself) { if($sht(ipban=>$si)!=$null) { # ip is already blocked xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n"); exit; } if (!pike_check_req()) { xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n"); $sht(ipban=>$si) = 1; exit; } } #!endif if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if(!sanity_check("1511", "7")) { xlog("Malformed SIP message from $si:$sp\n"); exit; } } # Handle requests within SIP dialogs route[WITHINDLG] { if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fails } route(RELAY); } else { if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(PRESENCE); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard exit; } } sl_send_reply("404","Not here"); } exit; } } # Handle SIP registrations route[REGISTRAR] { if (is_method("REGISTER")) { if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); # uncomment next line to do SIP NAT pinging ## setbflag(FLB_NATSIPPING); } if (!save("location")) sl_reply_error(); exit; } } # USER location service route[LOCATION] { #!ifdef WITH_ALIASDB # search in DB-based aliases alias_db_lookup("dbaliases"); #!endif if (!lookup("location")) { switch ($rc) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also if (is_method("INVITE")) { setflag(FLT_ACCMISSED); } } # Presence server route route[PRESENCE] { if(!is_method("PUBLISH|SUBSCRIBE")) return; #!ifdef WITH_PRESENCE if (!t_newtran()) { sl_reply_error(); exit; }; if(is_method("PUBLISH")) { handle_publish(); t_release(); } else if( is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); } exit; #!endif # if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==$null) { sl_send_reply("404", "Not here"); exit; } return; } # Authentication route route[AUTH] { #!ifdef WITH_AUTH if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) if (!www_authorize("$td", "subscriber")) { www_challenge("$td", "0"); exit; } if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { #!ifdef WITH_FREESWITCH if(route(FSINBOUND)) return; #!endif #!ifdef WITH_IPAUTH if(allow_source_address()) { # source IP allowed return; } #!endif # authenticate if from local subscriber if (from_uri==myself) { if (!proxy_authorize("$fd", "subscriber")) { proxy_challenge("$fd", "0"); exit; } if (is_method("PUBLISH")) { if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { if ($au!=$fU) { sl_send_reply("403","Forbidden auth ID"); exit; } } consume_credentials(); # caller authenticated } else { # caller is not local subscriber, then check if it calls # a local destination, otherwise deny, not an open relay here if (!uri==myself) { sl_send_reply("403","Not relaying"); exit; } } } #!endif return; } # Caller NAT detection route route[NAT] { #!ifdef WITH_NAT force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); } setflag(FLT_NATS); } #!endif return; } # RTPProxy control route[RTPPROXY] { #!ifdef WITH_NAT if (is_method("BYE")) { unforce_rtp_proxy(); } else if (is_method("INVITE")){ force_rtp_proxy(); } if (!has_totag()) add_rr_param(";nat=yes"); #!endif return; } # Routing to foreign domains route[SIPOUT] { if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(RELAY); } } # PSTN GW routing route[PSTN] { #!ifdef WITH_PSTN # check if PSTN GW IP is defined if (strempty($sel(cfg_get.pstn.gw_ip))) { xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n"); return; } # route to PSTN dialed numbers starting with '+' or '00' # (international format) # - update the condition to match your dialing rules for PSTN routing if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return; # only local users allowed to call if(from_uri!=myself) { sl_send_reply("403", "Not Allowed"); exit; } $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); route(RELAY); exit; #!endif return; } # XMLRPC routing #!ifdef WITH_XMLRPC route[XMLRPC] { # allow XMLRPC from localhost if ((method=="POST" || method=="GET") && (src_ip==127.0.0.1)) { # close connection only for xmlrpclib user agents (there is a bug in # xmlrpclib: it waits for EOF before interpreting the response). if ($hdr(User-Agent) =~ "xmlrpclib") set_reply_close(); set_reply_no_connect(); dispatch_rpc(); exit; } send_reply("403", "Forbidden"); exit; } #!endif #!ifdef WITH_FREESWITCH # FreeSWITCH routing blocks route[FSINBOUND] { if($si== $sel(cfg_get.freeswitch.bindip) && $sp==$sel(cfg_get.freeswitch.bindport)) return 1; return -1; } route[FSDISPATCH] { if(!is_method("INVITE")) return; if(route(FSINBOUND)) return; # dial number selection switch($rU) { case /"^41$": # 41 - voicebox menu # allow only authenticated users if($au==$null) { sl_send_reply("403", "Not allowed"); exit; } $rU = "vm-" + $au; break; case /"^441[0-9][0-9]$": # starting with 44 folowed by 1XY - direct call to voice box strip(2); route(FSVBOX); break; case /"^433[01][0-9][0-9]$": # starting with 433 folowed by (0|1)XY - conference strip(2); break; case /"^45[0-9]+$": strip(2); break; default: # offline - send to voicebox if (!registered("location")) { route(FSVBOX); exit; } # online - do bridging prefix("kb-"); if(is_method("INVITE")) { # in case of failure - re-route to FreeSWITCH VoiceMail t_on_failure("FAIL_FSVBOX"); } } route(FSRELAY); exit; } route[FSVBOX] { if(!($rU=~"^1[0-9][0-9]+$")) return; prefix("vb-"); route(FSRELAY); } # Send to FreeSWITCH route[FSRELAY] { $du = "sip:" + $sel(cfg_get.freeswitch.bindip) + ":" + $sel(cfg_get.freeswitch.bindport); if($var(newbranch)==1) { append_branch(); $var(newbranch) = 0; } route(RELAY); exit; } #!endif # Sample branch router branch_route[BRANCH_ONE] { xdbg("new branch at $ru\n"); } # Sample onreply route onreply_route[REPLY_ONE] { xdbg("incoming reply\n"); #!ifdef WITH_NAT if ((isflagset(FLT_NATS) || isbflagset(FLB_NATB)) && status=~"(183)|(2[0-9][0-9])") { force_rtp_proxy(); } if (isbflagset("6")) { fix_nated_contact(); } #!endif } # Sample failure route failure_route[FAIL_ONE] { #!ifdef WITH_NAT if (is_method("INVITE") && (isbflagset(FLB_NATB) || isflagset(FLT_NATS))) { unforce_rtp_proxy(); } #!endif if (t_is_canceled()) { exit; } # uncomment the following lines if you want to block client # redirect based on 3xx replies. ##if (t_check_status("3[0-9][0-9]")) { ##t_reply("404","Not found"); ## exit; ##} # uncomment the following lines if you want to redirect the failed # calls to a different new destination ##if (t_check_status("486|408")) { ## sethostport("10.0.0.100:5060"); ## append_branch(); ## # do not set the missed call flag again ## t_relay(); ##} } #!ifdef WITH_FREESWITCH failure_route[FAIL_FSVBOX] { #!ifdef WITH_NAT if (is_method("INVITE") && (isbflagset(FLB_NATB) || isflagset(FLT_NATS))) { unforce_rtp_proxy(); } #!endif if (t_is_canceled()) { exit; } if (t_check_status("486|408")) { # re-route to FreeSWITCH VoiceMail $rU = $avp(callee); $var(newbranch) = 1; route(FSVBOX); } } #!endif
# $Id$ # # The Kamailio configuration file for the control tools. # # Here you can set variables used in the kamctl and kamdbctl setup # scripts. Per default all variables here are commented out, the control tools # will use their internal default values. ## your SIP domain SIP_DOMAIN=10.0.0.100 ## chrooted directory # $CHROOT_DIR="/path/to/chrooted/directory" ## database type: MYSQL, PGSQL, ORACLE, DB_BERKELEY, or DBTEXT, by default none is loaded # If you want to setup a database with kamdbctl, you must at least specify # this parameter. DBENGINE=PGSQL ## database host DBHOST=localhost ## database name (for ORACLE this is TNS name) DBNAME=openser # database path used by dbtext or db_berkeley # DB_PATH="/usr/local/etc/kamailio/dbtext" ## database read/write user DBRWUSER=openser ## password for database read/write user DBRWPW="openserrw" ## database read only user DBROUSER=openserro ## password for database read only user DBROPW=openserro ## database super user (for ORACLE this is 'scheme-creator' user) DBROOTUSER="postgres" # user name column # USERCOL="username" # SQL definitions # If you change this definitions here, then you must change them # in db/schema/entities.xml too. # FIXME # FOREVER="2020-05-28 21:32:15" # DEFAULT_ALIASES_EXPIRES=$FOREVER # DEFAULT_Q="1.0" # DEFAULT_CALLID="Default-Call-ID" # DEFAULT_CSEQ="13" # DEFAULT_LOCATION_EXPIRES=$FOREVER # Program to calculate a message-digest fingerprint # MD5="md5sum" # awk tool # AWK="awk" # If you use a system with a grep and egrep that is not 100% gnu grep compatible, # e.g. solaris, install the gnu grep (ggrep) and specify this below. # # grep tool # GREP="grep" # egrep tool # EGREP="egrep" # sed tool # SED="sed" # tail tool # LAST_LINE="tail -n 1" # expr tool # EXPR="expr" # Describe what additional tables to install. Valid values for the variables # below are yes/no/ask. With ask (default) it will interactively ask the user # for an answer, while yes/no allow for automated, unassisted installs. # # If to install tables for the modules in the EXTRA_MODULES variable. # INSTALL_EXTRA_TABLES=ask # If to install presence related tables. # INSTALL_PRESENCE_TABLES=ask # Define what module tables should be installed. # If you use the postgres database and want to change the installed tables, then you # must also adjust the STANDARD_TABLES or EXTRA_TABLES variable accordingly in the # kamdbctl.base script. # Kamailio standard modules # STANDARD_MODULES="standard acc lcr domain group permissions registrar usrloc msilo # alias_db uri_db speeddial avpops auth_db pdt dialog dispatcher # dialplan" # Kamailio extra modules # EXTRA_MODULES="imc cpl siptrace domainpolicy carrierroute userblacklist htable purple" ## type of aliases used: DB - database aliases; UL - usrloc aliases ## - default: none # ALIASES_TYPE="DB" ## control engine: FIFO or UNIXSOCK ## - default FIFO # CTLENGINE="FIFO" ## path to FIFO file # OSER_FIFO="FIFO" ## check ACL names; default on (1); off (0) # VERIFY_ACL=1 ## ACL names - if VERIFY_ACL is set, only the ACL names from below list ## are accepted # ACL_GROUPS="local ld int voicemail free-pstn" ## verbose - debug purposes - default '0' # VERBOSE=1 ## do (1) or don't (0) store plaintext passwords ## in the subscriber table - default '1' # STORE_PLAINTEXT_PW=0 ## OPENSER START Options ## PID file path - default is: /var/run/kamailio/kamailio.pid # PID_FILE=/var/run/kamailio/kamailio.pid ## Extra start options - default is: not set # example: start Kamailio with 64MB share memory: STARTOPTIONS="-m 64" # STARTOPTIONS=
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
