Hi,
TLS work on TCP 5061
To view the header you can use $ hdr (HEADER_NAME).
Not much English, sorry.
2012/11/29 Kamal Palei <palei.ka...@gmail.com>
> Dear All
> I ma trying to have all SIP signalling through TLS. Using Kamailio 3.1.5.
>
> In a typical setup, endpoints initiates call, messages reach Kamailio
> proxy, Kamailio proxy forwards these packets to main proxy.
>
> In Kamailio.cfg, I have added below code.
>
>
> route {
>
> # per request initial checks
> route(REQINIT);
> setflag(FLT_NATS);
>
> if(is_method("REGISTER"))
> {
> t_relay_to("tls:115.114.48.19:443");
> exit();
> }
> else
> {
> xlog("incoming request\n");
>
> route(WITHINDLG);
> route(RTPPROXY);
> t_on_reply("REPLY_ONE");
> t_on_failure("FAIL_ONE");
> t_relay_to("tls:115.114.48.19:443");
> exit();
> }
>
> ..............
>
> I am finding most of the messages are getting transmitted in TLS. But few
> ACK and REFER / REFER response packets are still being transported in UDP.
>
> Can somebody tell me whats the wrong I am doing here.
>
> By any chance
> route(WITHINDLG);
> route(RTPPROXY);
>
> before t_relay_to("tls:115.114.48.19:443");
>
> can cause this ????
>
>
> And one more doubt.., 115.114.48.19 I get in route header. How can I
> extract the value of route header, so that I do not have to hard-code
>
> Many thanks in advance.
>
> -kamal
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
--
*Freddy Condori Chura
Ingeniero Civil en Computación e Informática
Magister en Ingeniería de Software*
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
