What is the listen parameter for tls?
IIRC, UDP is mandatory, you should have some workers for it, even you
reject the traffic on it.
The default config file has TLS support inside, just enable:
#!define WITH_TLS
and then test with it to see if you can connect. If yes, compare with
your config to see what you did wrong.
Cheers,
Daniel
On 10/31/12 6:12 PM, Ramazan Yilmaz wrote:
I swithced again to tcp, and 'kamctl ps' now gives the following:
Process:: ID=0 PID=5913 Type=attendant
Process:: ID=1 PID=5914 Type=slow timer
Process:: ID=2 PID=5915 Type=timer
Process:: ID=3 PID=5916 Type=MI FIFO
Process:: ID=4 PID=5917 Type=ctl handler
Process:: ID=5 PID=5918 Type=MI DATAGRAM
Process:: ID=6 PID=5919 Type=TIMER NH
Process:: ID=7 PID=5920 Type=tcp receiver (generic) child=0
Process:: ID=8 PID=5921 Type=tcp receiver (generic) child=1
Process:: ID=9 PID=5922 Type=tcp receiver (generic) child=2
Process:: ID=10 PID=5923 Type=tcp receiver (generic) child=3
Process:: ID=11 PID=5924 Type=tcp main process
So it seems ok for TCP, right?
The only modification I made while switching from TLS to TCP is to
change the listen=... directive (and disabling tls module parameters,
of course) in kamailio.cfg file. So I do not make any change on
children parameter value while switching to TCP, i.e. I have the
following lines in kamailio.cfg
fork=yes
children=4
Any suggestion?
On Wed, Oct 31, 2012 at 6:18 PM, Daniel-Constantin Mierla
<mico...@gmail.com <mailto:mico...@gmail.com>> wrote:
Is this all the output of kamctl ps? Because there is no udp or
tcp worker process. If yes, then is something wrong with your
config, be sure you set proper children parameter value.
Cheers,
Daniel
On 10/31/12 4:53 PM, Ramazan Yilmaz wrote:
And the output of 'kamctl ps' is as following (after changing
back to tls):
Process:: ID=0 PID=5621 Type=attendant
Process:: ID=1 PID=5622 Type=slow timer
Process:: ID=2 PID=5623 Type=timer
Process:: ID=3 PID=5624 Type=MI FIFO
Process:: ID=4 PID=5625 Type=ctl handler
Process:: ID=5 PID=5626 Type=MI DATAGRAM
Process:: ID=6 PID=5627 Type=TIMER NH
Process:: ID=7 PID=5628 Type=tcp main process
And the new error lines in syslog for the processes above are,
Oct 31 16:52:14 ubuntu
/usr/local/kamailio-3.3/sbin/kamailio[5628]: : <core>
[tcp_main.c:3578]: BUG: handle_ser_child: fd -1 for 0 (pid 5621)
Oct 31 16:52:14 ubuntu
/usr/local/kamailio-3.3/sbin/kamailio[5628]: : <core>
[pass_fd.c:103]: ERROR: recv_all: 1st recv on 56 failed: Bad file
descriptor
Oct 31 16:52:14 ubuntu
/usr/local/kamailio-3.3/sbin/kamailio[5628]: : <core>
[tcp_main.c:3363]: ERROR: handle_tcp_child: read from tcp child
0 (pid 0, no 0) Bad file descriptor [9]
Oct 31 16:52:14 ubuntu
/usr/local/kamailio-3.3/sbin/kamailio[5628]: : <core>
[pass_fd.c:209]: ERROR: send_fd: sendmsg failed sending 17 on 56:
Bad file descriptor (9)
Oct 31 16:52:14 ubuntu
/usr/local/kamailio-3.3/sbin/kamailio[5628]: ERROR: <core>
[tcp_main.c:4006]: ERROR: send2child: send_fd failed for
0x7f215351b588 (flags 0x4018), fd 17
On Wed, Oct 31, 2012 at 5:04 PM, Ramazan Yilmaz
<ramazan...@gmail.com <mailto:ramazan...@gmail.com>> wrote:
These messages are for tls. When switched to TCP, it works
fine. What can be the problem?
On Wed, Oct 31, 2012 at 3:39 PM, Daniel-Constantin Mierla
<mico...@gmail.com <mailto:mico...@gmail.com>> wrote:
Hello,
does registration over UDP work fine? Are these messages
for tcp or tls connections?
Can you paste the output of 'kamctl ps'?
Cheers,
Daniel
On 10/30/12 5:32 PM, Ramazan Yilmaz wrote:
Any ideas? It really seems as a bug, as the logs say.
But do you have any workaround suggestion?
On Mon, Oct 29, 2012 at 11:09 PM, Ramazan Yilmaz
<ramazan...@gmail.com <mailto:ramazan...@gmail.com>> wrote:
Hi,
I installed kamailio 3.2.x a few times before and
they were really fine. I decided to install a fresh
one and followed the instructions on
http://www.kamailio.org/wiki/install/3.3.x/git.
However there is a problem: clients cannot register
to kamailio. Each registration attempt produces the
following error in the syslog:
Oct 29 20:07:38 ubuntu
/usr/local/kamailio-3.3/sbin/kamailio[32421]: :
<core> [tcp_main.c:3578]: BUG: handle_ser_child: fd
-1 for 0 (pid 32414)
Oct 29 20:07:38 ubuntu
/usr/local/kamailio-3.3/sbin/kamailio[32421]: :
<core> [pass_fd.c:103]: ERROR: recv_all: 1st recv on
56 failed: Bad file descriptor
Oct 29 20:07:38 ubuntu
/usr/local/kamailio-3.3/sbin/kamailio[32421]: :
<core> [tcp_main.c:3363]: ERROR: handle_tcp_child:
read from tcp child 0 (pid 0, no 0) Bad file
descriptor [9]
Oct 29 20:07:38 ubuntu
/usr/local/kamailio-3.3/sbin/kamailio[32421]: :
<core> [pass_fd.c:209]: ERROR: send_fd: sendmsg
failed sending 17 on 56: Bad file descriptor (9)
Oct 29 20:07:38 ubuntu
/usr/local/kamailio-3.3/sbin/kamailio[32421]: ERROR:
<core> [tcp_main.c:4006]: ERROR: send2child: send_fd
failed for 0x7f510bc41588 (flags 0x4018), fd 17
What could be the problem? Any suggestion?
In case you need, the server is ubuntu server 11.10,
and I installed including mysql and tls modules.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
list
sr-users@lists.sip-router.org
<mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -http://www.asipto.com
http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda>
-http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012
-http://asipto.com/u/kat
Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012
-http://asipto.com/u/katu
--
Daniel-Constantin Mierla -http://www.asipto.com
http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda>
-http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 -http://asipto.com/u/kat
Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012
-http://asipto.com/u/katu
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012 -
http://asipto.com/u/katu
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
