You need to load the cfgutils module to use pv_printf().
Regards,
Peter
On Wed, 2012-10-10 at 13:15 -0400, Ed Brady wrote:
> I modified the original config to include the event block and added
> the necessary module loads, but it still will not start properly. It
> displays all the connection info like it has started but then says
> "kamailio error, failed to start." When I look at the syslog I see the
> following errors:
>
>
>
>
> ct 10 13:05:49 msg1 /usr/sbin/kamailio[19896]: ERROR: <core>
> [route.c:1216]: fixing failed (code=-1) at
> cfg:/etc/kamailio/kamailio.cfg:952
> Oct 10 13:05:49 msg1 /usr/sbin/kamailio[19896]: ERROR: <core>
> [route.c:1216]: fixing failed (code=-1) at
> cfg:/etc/kamailio/kamailio.cfg:962
>
>
>
> The lines in the config it is referring to are:
>
> pv_printf("$var(sessid)", "s.$(pp).$(var(cnt)).$(RANDOM)");
>
> and
>
> if($msrp(method)=="SEND")
>
>
> respectively. Any advice is appreciated. I am new to Kamailio and
> MSRP, but not SIP.
>
>
> Thanks,
> Ed
>
>
>
>
> On Wed, Oct 10, 2012 at 1:03 PM, Peter Dunkley
> <peter.dunk...@crocodile-rcs.com> wrote:
>
> I also noticed a typo in the example.
>
> The modparam for htable creates a hash table called "c", but
> the event-route[] uses a hash table called "msrp".
>
> This is now fixed in git master.
>
> Regards,
>
> Peter
>
>
>
> On Wed, 2012-10-10 at 17:58 +0100, Peter Dunkley wrote:
>
> > Hi,
> >
> > You need to load the htable module to use $sht().
> >
> > This is one of the modules shown at the top of the example.
> >
> > Regards,
> >
> > Peter
> >
> > On Wed, 2012-10-10 at 12:53 -0400, Ed Brady wrote:
> >
> > > After adding the event block from the MSRP module example
> > > config, I get the following error:
> > >
> > >
> > >
> > > Not starting Kamailio: invalid configuration file!
> > > -e
> > > 0(19786) INFO: tls [tls_init.c:377]: tls:
> > > init_tls: disabling compression...
> > > 0(19786) ERROR: <core> [pvapi.c:708]: error
> > > searching pvar "sht"
> > > 0(19786) ERROR: <core> [pvapi.c:912]: wrong char
> > > [m/109] in [$sht(msrp=>$var(sessid)::srcaddr)] at
> > > [5 (5)]
> > > 0(19786) : <core> [cfg.y:3591]: parse error in
> > > config file /etc/kamailio/kamailio.cfg, line 952,
> > > column 3-35: unknown script pseudo variable
> > > $sht(msrp=>$var(sessid)::srcaddr)
> > >
> > > ERROR: bad config file (1 errors)
> > >
> > >
> > >
> > > Any thoughts on why it would have trouble locating the sht
> > > var?
> > >
> > >
> > > Thanks,
> > > Ed
> > >
> > >
> > > On Wed, Oct 10, 2012 at 12:40 PM, Ed Brady
> > > <ebr...@talkforgood.com> wrote:
> > >
> > > When I used the provided config example from the
> > > module page, I get all sorts of errors from the
> > > config file when trying to start Kamailio. I am
> > > going to attempt to just copy the event route
> > > block into my working config and see what happens.
> > > Below are the errors it spits out when trying to
> > > start with the example config:
> > >
> > >
> > >
> > > Not starting Kamailio: invalid
> > > configuration file!
> > > -e
> > > 0(19714) ERROR: <core> [sr_module.c:560]:
> > > ERROR: load_module: could not find module
> > > <sl> in <modules_k/:modules/>
> > > 0(19714) : <core> [cfg.y:3591]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 20,
> > > column 12-18: failed to load module
> > > 0(19714) ERROR: <core> [sr_module.c:560]:
> > > ERROR: load_module: could not find module
> > > <kex> in <modules_k/:modules/>
> > > 0(19714) : <core> [cfg.y:3591]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 21,
> > > column 12-19: failed to load module
> > > 0(19714) ERROR: <core> [sr_module.c:560]:
> > > ERROR: load_module: could not find module
> > > <mi_fifo> in <modules_k/:modules/>
> > > 0(19714) : <core> [cfg.y:3591]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 22,
> > > column 12-23: failed to load module
> > > 0(19714) ERROR: <core> [sr_module.c:560]:
> > > ERROR: load_module: could not find module
> > > <ctl> in <modules_k/:modules/>
> > > 0(19714) : <core> [cfg.y:3591]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 23,
> > > column 12-19: failed to load module
> > > 0(19714) ERROR: <core> [sr_module.c:560]:
> > > ERROR: load_module: could not find module
> > > <msrp> in <modules_k/:modules/>
> > > 0(19714) : <core> [cfg.y:3591]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 24,
> > > column 12-20: failed to load module
> > > 0(19714) ERROR: <core> [sr_module.c:560]:
> > > ERROR: load_module: could not find module
> > > <pv> in <modules_k/:modules/>
> > > 0(19714) : <core> [cfg.y:3591]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 25,
> > > column 12-18: failed to load module
> > > 0(19714) ERROR: <core> [sr_module.c:560]:
> > > ERROR: load_module: could not find module
> > > <auth> in <modules_k/:modules/>
> > > 0(19714) : <core> [cfg.y:3591]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 26,
> > > column 12-20: failed to load module
> > > 0(19714) ERROR: <core> [sr_module.c:560]:
> > > ERROR: load_module: could not find module
> > > <cfgutils> in <modules_k/:modules/>
> > > 0(19714) : <core> [cfg.y:3591]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 27,
> > > column 12-24: failed to load module
> > > 0(19714) ERROR: <core> [sr_module.c:560]:
> > > ERROR: load_module: could not find module
> > > <htable> in <modules_k/:modules/>
> > > 0(19714) : <core> [cfg.y:3591]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 28,
> > > column 12-22: failed to load module
> > > 0(19714) ERROR: <core> [sr_module.c:560]:
> > > ERROR: load_module: could not find module
> > > <xlog> in <modules_k/:modules/>
> > > 0(19714) : <core> [cfg.y:3591]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 29,
> > > column 12-20: failed to load module
> > > 0(19714) ERROR: <core> [modparam.c:162]:
> > > set_mod_param_regex: No module matching
> > > <mi_fifo> found
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 32,
> > > column 54: Can't set module parameter
> > > 0(19714) ERROR: <core> [modparam.c:162]:
> > > set_mod_param_regex: No module matching
> > > <htable> found
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 34,
> > > column 58: Can't set module parameter
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command
> > > sl_send_reply
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 37,
> > > column 36: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command xdbg
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 46,
> > > column 52: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command xdbg
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 47,
> > > column 35: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command xdbg
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 48,
> > > column 49: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command xdbg
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 49,
> > > column 50: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command xdbg
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 50,
> > > column 50: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command xdbg
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 51,
> > > column 51: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command xdbg
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 52,
> > > column 50: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command xdbg
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 53,
> > > column 51: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command xdbg
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 54,
> > > column 51: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command xdbg
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 55,
> > > column 50: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command xdbg
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 56,
> > > column 50: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command xdbg
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 57,
> > > column 49: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command
> > > msrp_reply_flags
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 59,
> > > column 22: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command
> > > msrp_is_reply
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 61,
> > > column 22: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [cfg.y:3455]: cfg.
> > > parser: failed to find command msrp_relay
> > > 0(19714) : <core> [cfg.y:3594]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 63,
> > > column 20: unknown command, missing
> > > loadmodule?
> > >
> > > 0(19714) ERROR: <core> [pvapi.c:708]:
> > > error searching pvar "msrp"
> > > 0(19714) ERROR: <core> [pvapi.c:912]:
> > > wrong char [m/109] in [$msrp(method)] at
> > > [6 (5)]
> > > 0(19714) : <core> [cfg.y:3591]: parse
> > > error in config
> > > file /etc/kamailio/kamailio.cfg, line 68,
> > > column 5-17: unknown script pseudo
> > > variable $msrp(method)
> > > ERROR: bad config file (29 errors)
> > >
> > >
> > >
> > >
> > >
> > > Thanks,
> > > Ed
> > >
> > >
> > >
> > >
> > > On Mon, Oct 8, 2012 at 6:14 PM, Daniel-Constantin
> > > Mierla <mico...@gmail.com> wrote:
> > >
> > > Hello,
> > >
> > >
> > > On 10/8/12 5:26 PM, Ed Brady wrote:
> > >
> > > Hi,
> > >
> > > I am working on an MSRP project
> > > with Kamailio. I have Kamailio
> > > installed and configured for SIP
> > > with several test accounts
> > > created, but am unable to send
> > > MSRP messages so far. I am using
> > > Blink as a test client, though the
> > > final intentions of the project
> > > will be to use iDoubs and IMSDroid
> > > for client connections. We are
> > > having these developed to our
> > > needs right now though, so I must
> > > use another client to begin
> > > testing.
> > >
> > > I have been unable to find good
> > > documentation on the initial
> > > configuration of MSRP in Kamailio.
> > > I have seen the module
> > > documentation, but am unclear how
> > > to utilize the information there
> > > to configure Kamailio properly. Is
> > > there any documentation on getting
> > > started with a basic MSRP relay
> > > setup so that two clients can chat
> > > and send files? I am not new to
> > > SIP, but this is my first project
> > > with MSRP.
> > >
> > >
> > > at the time I developed the module were no
> > > good clients supporting msrp, so I did
> > > testing mainly with forged network tools.
> > > But I am happy to assist as much as
> > > possible provided my availability and fix
> > > eventual issues.
> > >
> > > The readme of the module provides and
> > > example for a stand alone msrp relay. If
> > > you want to put it inside a more complex
> > > kamailio configuration that handles sip as
> > > well, then be sure you load msrp module as
> > > well as all the other modules from the
> > > readme's config and set the module
> > > parameters.
> > >
> > > Then copy the event_route[msrp:frame-in]
> > > block in your config. MSRP packets have to
> > > be sent to port 5060 (or 5061 for tls), or
> > > you can configure kamailio to listen on an
> > > additional port where you send the msrp
> > > packets.
> > >
> > > If something is not working, send the log
> > > messages (debug=3 in your config) and the
> > > ngrep trace if you use plain tcp.
> > >
> > > Cheers,
> > > Daniel
> > >
> > >
> > > _______________________________________________
> > > SIP Express Router (SER) and Kamailio (OpenSER) -
> sr-users mailing list
> > > sr-users@lists.sip-router.org
> > >
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
> > >
> > >
> > >
> >
> > _______________________________________________
> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
> list
> > sr-users@lists.sip-router.org
> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
> >
>
> --
> Peter Dunkley
> Technical Director
> Crocodile RCS Ltd
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
> mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Peter Dunkley
Technical Director
Crocodile RCS Ltd
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
