You have to set memdbg (or memlog) parameters to lower value than debug. Cheers, Daniel
On 2 Oct 2012, at 16:57, Juha Heinanen <j...@tutpro.com> wrote: > Daniel-Constantin Mierla writes: > >> Better change the Makefile.defs and set MEMDBG=1 inside it. > > ok, i added this to my debian/rules: > > # Turn on memory debuging > sed -i -e 's/MEMDBG ?= 0/MEMDBG ?= 1/' Makefile.defs > > after build, i checked in source dir that the change took effect: > > /usr/src/trunk-src/openxg-sip-proxy$ egrep MEMDBG Makefile.defs > MEMDBG ?= 1 > ifeq ($(MEMDBG), 1) > > now also -I shows DBG_QM_MALLOC flag: > > /usr/src/trunk-src/openxg-sip-proxy$ ./sip-proxy -I > Print out of sip-proxy internals > Version: sip-proxy 3.4.0-dev4 (x86_64/linux) > Default config: /etc/sip-proxy/sip-proxy.cfg > Default paths to modules: > /usr/lib/sip-proxy/modules:/usr/lib/sip-proxy/modules_s:/usr/lib/sip-proxy/modules_k > Compile flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, > USE_RAW_SOCKS, USE_STUN, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, > SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, > USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES > > still, when i stop sip-proxy at debug level 2, i only get the WARNINGs: > > Oct 2 17:51:12 siika /usr/sbin/sip-proxy[30707]: WARNING: <core> > [mem/q_malloc.c:441]: WARNING:qm_free: free(0) called > > and at debug level 3 i don't get any WARNINGs. does debug level 3 > replace WARNINGs with DEBUG messages instead of adding DEBUG messages on > top of WARNINGs? > > -- juha _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
