Yes,
Verified, 'gruu_enabled' is set to one.
Regards
2012/7/27 Daniel-Constantin Mierla <mico...@gmail.com>
> Hello,
>
> just to be sure before going to any further investigation (as I remember,
> such case I tested a bit with some command line tools due to lack of a sip
> phone with good ob/gruu support), do you have in the config:
>
> modparam("registrar", "gruu_enabled", 1)
>
> The default config file in 3.3, has the parameter set to 0.
>
> Cheers,
> Daniel
>
>
> On 7/27/12 10:05 AM, Iñaki Baz Castillo wrote:
>
>> Hi, full agree with this bug report. Adding the devel maillist. More
>> comments at the end of the mail:
>>
>>
>> 2012/7/26 José Luis Millán <jmil...@aliax.net>:
>>
>>> Hi,
>>>
>>> I'm using Kamilio 3.3.0 as registrar server. I`m using an outbound
>>> proxy so
>>> 'use_path' parameter or 'registrar' module is enabled.
>>>
>>> According to RFC 5626, a re-registration from a specific combination of
>>> AoR,
>>> instance_id and reg_id must update the binding.
>>>
>>> ""
>>> If the registrar receives a re-registration for a specific
>>> combination of AOR, and instance-id and reg-id values, the registrar
>>> MUST update any information that uniquely identifies the network flow
>>> over which the request arrived if that information has changed, and
>>> SHOULD update the time the binding was last updated.
>>> ""
>>>
>>> In my installation this is not fullfilled as shown:
>>>
>>> ""
>>> AOR:: jmillan
>>> Contact:: sip:jmillan@MY_IP;transport=**ws;ov-ob=a570655c14
>>> Q=
>>> Expires:: 181
>>> Callid:: 1hgq3khalq2rzfr
>>> Cseq:: 108
>>> User-agent:: JsSIP 0.1.0
>>> Path::
>>> <sip:OUTBOUND_IP:9090;**transport=tcp;lr;ovid=**
>>> de0c0b9f>,<sip:a570655c14@**OUTBOUND_IP:10080;transport=**
>>> ws;lr;ovid=de0c0b9f;ob>
>>> State:: CS_SYNC
>>> Flags:: 0
>>> Cflag:: 0
>>> Socket:: tcp:KAM_IP:5060
>>> Methods:: 783
>>> Ruid:: uloc-50119d99-328e-1
>>> Instance::
>>> <urn:uuid:38dce009-ae1f-4fd1-**91dc-99ed9affddc1>
>>> Reg-Id:: 1
>>> Contact:: sip:jmillan@MY_IP;transport=**ws;ov-ob=1dd97b4d51
>>> Q=
>>> Expires:: 193
>>> Callid:: 1hgq3khalq2rzfr
>>> Cseq:: 110
>>> User-agent:: JsSIP 0.1.0
>>> Path::
>>> <sip:OUTBOUND_IP:9090;**transport=tcp;lr;ovid=**
>>> de0c0b9f>,<sip:1dd97b4d51@**OUTBOUND_IP:10080;transport=**
>>> ws;lr;ovid=de0c0b9f;ob>
>>> State:: CS_SYNC
>>> Flags:: 0
>>> Cflag:: 0
>>> Socket:: tcp:KAM_IP:5060
>>> Methods:: 783
>>> Ruid:: uloc-50119d99-3290-2
>>> Instance::
>>> <urn:uuid:38dce009-ae1f-4fd1-**91dc-99ed9affddc1>
>>> Reg-Id:: 1
>>> ""
>>>
>>> The scenario is such that when the client looses the connection with the
>>> Outbound Server, it reconnects and re-registers to Kamailio in order to
>>> replace registration and be able to receive in-dialog messages.
>>>
>> Receiving in-dialog requests should work since GRUU is also being
>> used. The problem is that the new REGISTER (after UA disconnection)
>> does not update the previous one (as this thread reports) so Kamailio
>> still chooses the previous binding which does not work anymore.
>>
>>
>> Regards.
>>
>>
>>
>>
>>
> --
> Daniel-Constantin Mierla - http://www.asipto.com
> http://twitter.com/#!/miconda -
> http://www.linkedin.com/in/**miconda<http://www.linkedin.com/in/miconda>
> Kamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 -
> http://asipto.com/u/katu
> Kamailio Practical Workshop, Netherlands, Sep 10-12, 2012 -
> http://asipto.com/u/kpw
>
>
>
> ______________________________**_________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
