Thanks Alex,
In my case it is ser.cfg, not kamilio.cfg.
I have made a single correction: I have changed this:
# ------------------ module loading ----------------------------------
#!ifdef LOCAL_TEST_RUN
loadpath "modules:modules_s"
#!else
loadpath "/usr/lib/ser/modules:/usr/lib/ser/modules_s"
#!endif
To this:
# ------------------ module loading ----------------------------------
#!ifdef LOCAL_TEST_RUN
loadpath "modules:modules_s"
#!else
loadpath
"/tmp/my/very/strange/path/lib/ser/modules:/tmp/my/very/strange/path/lib/ser/modules_s"
#!endif
And the situation has improved. I have gone from:
» /tmp/my/very/strange/path/sbin/ser
loading modules under /usr/lib/ser/modules:/usr/lib/ser/modules_s
ERROR: bad config file (34 errors)
To:
» /tmp/my/very/strange/path/sbin/ser
loading modules under
/tmp/my/very/strange/path/lib/ser/modules:/tmp/my/very/strange/path/lib/ser/modules_s
ERROR: bad config file (2 errors)
But still two errors, which I can not find. How can I tell the ser
binary to help me with pinpointing the errors?
I have tried to start with -ddd, but it has not helped.
By the way, the other configuration files are:
etc/
`-- ser
|-- dictionary.sip-router
|-- ser-advanced.cfg
|-- ser-basic.cfg
`-- ser.cfg
And they seem to be fine. There was a correct reference to the right
installation path in ser-basic.cfg:
# ------------------ module loading ----------------------------------
#!ifdef LOCAL_TEST_RUN
loadpath "modules:modules_s"
#!else
loadpath
"/tmp/my/very/strange/path/lib/ser/modules:/tmp/my/very/strange/path/lib/ser/modules_s"
#!endif
On Sat, Apr 7, 2012 at 9:54 PM, Alex Balashov <abalas...@evaristesys.com> wrote:
> The prefix only specifies the destination for the build targets. As far as
> things like module paths, they are not affected. You will have to change them
> manually in kamailio.cfg. However, the good news is that there aren't a
> whole lot of paths to change; you really only need to change it in
> kamailio,cfg, and in any init scripts.
>
> --
> Alex Balashov - Principal
> Evariste Systems LLC
> 235 E Ponce de Leon Ave
> Suite 106
> Decatur, GA 30030
> Tel: +1-678-954-0670
> Fax: +1-404-961-1892
> Web: http://www.evaristesys.com/, http://www.alexbalashov.com
>
> Daniel Gonzalez <gonva...@gonvaled.com> wrote:
>
>>Hello,
>>
>>This is my first message to this list.
>>
>>I have installed sip-router as follows (my system is Ubuntu 10.04):
>>
>> cd /tmp
>> git clone --depth 1 git://git.sip-router.org/sip-router sip-router
>> cd sip-router
>> git checkout -b 3.1 origin/3.1
>> local prefix=/tmp/my/very/strange/path
>> mkdir -p $prefix
>> sudo apt-get install -y flex
>> sudo apt-get install -y docbook2x
>> make proper
>> make cfg prefix=$prefix
>> make all prefix=$prefix
>> make install prefix=$prefix
>>
>>And this has worked as expected.
>>
>>Now I try to start the daemon:
>>
>> $ /tmp/my/very/strange/path/sbin/ser
>> loading modules under /usr/lib/ser/modules:/usr/lib/ser/modules_s
>>
>>What can I do so that my non-standard path is fully recognized by all
>>sip router tools?
>>
>>Thanks,
>>Daniel Gonzalez
>>
>>_______________________________________________
>>SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>sr-users@lists.sip-router.org
>>http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
