Hello,
On 2/10/12 2:32 PM, Uri Shacked wrote:
thanks,
it is good see there is a wayto start with -A... and it might make it
easier a little (cause i use the define as the group the server
belongs to).
but, it doesn't help me fully in my case.
i would like to have a generic start, and generic cfg file (it is much
easier when you need to maintain).
the best thing i would like to do is something like that:
let say i have "route on start" or "get data from DB on start"...
then, i set something like:
get "myself"
from list of kamailio servers"
and set my group to "the value set on me"
it seems to me something very usefull, when you use 2 and more
kamailio at different sites, and still want a generic code and functions.
if i was a programer... i might try to write some module :-)
you can load values from a database table via htable module and then use
them to build the logic -- htable values are accessible via $sht(...).
Cheers,
Daniel
thanks anyway,
Uri
On Fri, Feb 10, 2012 at 2:51 PM, Daniel-Constantin Mierla
<mico...@gmail.com <mailto:mico...@gmail.com>> wrote:
Hello,
you can use defines to control the order (the values of NP
servers), here is an example of defining NP servers (to str value,
for sake of explanation):
#!ifdef SRV1
#!define NPSRV1 "abc"
#!define NPSRV2 "xyz"
#!else
#!define NPSRV2 "abc"
#!define NPSRV1 "xyz"
#!endif
and start kamailio with parameter '-A SRV1' for the first instance.
Cheers,
Daniel
On 2/10/12 6:28 AM, Uri Shacked wrote:
Hi again...
(i do find myself ask many questions these days.... :-))
well, now here is one more:
i have 2 kamailio servers that i use in 2 locations. both use the
same
tables and DBURL.
each of my server turns to a number portability (NP) server at
its same
location.
for example, if server 1 has the call, it will turn to NP server
1 with the
query, and if the query fails, it will then turn to NP server 2.
the kamailio server 2 does the same. but, turns to NP server 2
first and if
it fails, to NP server 1.
once this is understood....
here is my issue - i want to have 1 generic cfg file for my 2
servers.
today, i use the same cfg file, but in server 1 i set it in the
cfg to its
group, and on server 2 the same but a different group....
i tried to understand how do i get each server to "pull" its
group from the
DB. something like "what is my group when my IP is X.Y.Z.Q ?
i raed the cfg_db module but didn't understand how to set it on
my cfg file
and on the DB.
what is the best way to do what i want?
hope i was clear....
BR,
thanks to all the guys that help me so far, i appriciate it a lot!
Uri
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla --http://www.asipto.com <http://www.asipto.com/>
http://linkedin.com/in/miconda -- http://twitter.com/miconda
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
