OK I will try it. but still, on startup, which suppose to start kamailio? /etc/init.d script or "kamailio" command without the wrapper. and what is the use of /etc/default/kamailio ?
On Wed, Feb 8, 2012 at 12:34 PM, Daniel-Constantin Mierla <mico...@gmail.com > wrote: > Hello, > > when you run just 'kamailio', the first executable found in path is > executed (this is returned by command 'which kamailio'). When you execute > with absolute path /etc/init.d/kamailio, then that specific file is > executed. > > 'which kamailio' returns very likely the kamailio binary > (/usr/local/sbin/kamailio if you installed from sources), which is the pure > kamailio with no command line parameters. > > The /etc/init.d/kamailio is a script, wrapper around the pure kamailio > binary, giving to it some command line parameters. > > If you do 'ps auxw | grep kamailio' you should see the difference of > running command. > > Cheers, > Daniel > > > On 2/5/12 9:26 AM, Uri Shacked wrote: > > Hi, > > any help will be graet.... > > > * hi, > *>* > *>* when i moved the /etc/init.d/kamailio file. kamailio did not start at > boot. > *>* now, i set the debug level to 4 and run kamailio in both ways. > *>* > *>* 1. "/etc/init.d/kamailio start" > *>* > * the resault was : > > *Feb 1 19:59:04 net-ivr-KamIN-J1 kamailio: DEBUG: <core> > [mem/q_malloc.c:202]: qm_malloc_init: QM_OPTIMIZE=16384, /ROUNDTO=2048 > Feb 1 19:59:04 net-ivr-KamIN-J1 kamailio: DEBUG: <core> > [mem/q_malloc.c:204]: qm_malloc_init: QM_HASH_SIZE=2099, qm_block > size=218344 > Feb 1 19:59:04 net-ivr-KamIN-J1 kamailio: DEBUG: <core> > [mem/q_malloc.c:205]: qm_malloc_init(0x7f1cf585b000, 2147483648), > start=0x7f1cf585b000 > Feb 1 19:59:04 net-ivr-KamIN-J1 kamailio: DEBUG: <core> > [mem/q_malloc.c:213]: qm_malloc_init: size= 2147483648, > init_overhead=218440 > Feb 1 19:59:04 net-ivr-KamIN-J1 kamailio: DEBUG: <core> > [mem/shm_mem.c:203]: shm_mem_init: success* > > >* > *>* you can see the shm_mem size is 2048Mb. > *>* > * > 2."kamailio" > the resault was : > > *Feb 1 19:56:50 net-ivr-KamIN-J1 kamailio: DEBUG: <core> > [mem/q_malloc.c:202]: qm_malloc_init: QM_OPTIMIZE=16384, /ROUNDTO=2048 > Feb 1 19:56:50 net-ivr-KamIN-J1 kamailio: DEBUG: <core> > [mem/q_malloc.c:204]: qm_malloc_init: QM_HASH_SIZE=2099, qm_block > size=218344 > Feb 1 19:56:50 net-ivr-KamIN-J1 kamailio: DEBUG: <core> > [mem/q_malloc.c:205]: qm_malloc_init(0x7f8618310000, 33554432), > start=0x7f8618310000 > Feb 1 19:56:50 net-ivr-KamIN-J1 kamailio: DEBUG: <core> > [mem/q_malloc.c:213]: qm_malloc_init: size= 33554432, init_overhead=218440 > Feb 1 19:56:50 net-ivr-KamIN-J1 kamailio: DEBUG: <core> > [mem/shm_mem.c:203]: shm_mem_init: success* > ** > the resault is 32Mb. > > any ideas? > > > >* > *>* On Wed, Feb 1, 2012 at 5:01 PM, Jason Penton <jason.penton at > smilecoms.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> > >wrote: > *>* > *>>* I am not familiar with Centos but I suspect there is another script > being > *>>* run from somewhere. What I would do is move the /etc/init.d/kamailio > script > *>>* somewhere safe (your home directory for eg). Then reboot and see if > *>>* kamailio still starts - if it does you need to find out whihc script > is > *>>* being called and where it is. > *>>* > *>>* If you are not running X by default you are prob in runlevel 3. If > you > *>>* are running X, then it will be 5. check where you runlevel scripts > are > *>>* pointing. e.g. > *>>* > *>>* ls -al /etc/rc3.d/SXXkamailio (X = [0-9]) > *>>* > *>>* Cheers > *>>* Jason > *>>* > *>>* On Wed, Feb 1, 2012 at 4:26 PM, Uri Shacked <uri.shacked at > gmail.com <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> > >wrote: > *>>* > *>>>* Hi, > *>>>* > *>>>* when i reboot the machine, it starts with 32Mb and i do not > understand > *>>>* why... > *>>>* so, does it use a startup file that i am not familiar with? > *>>>* what is the appropriate runlevel? how do i set it and where? > *>>>* > *>>>* thanks, > *>>>* Uri > *>>>* > *>>>* > *>>>* >Hi Sammy, > *>>>* > > *>>>* >When you use the init script, it is starting Kamailio with the > correct > *>>>* >arguments to get the environment you wish (-m 2048 probably). If > *>>>* however, > *>>>* >you just call kamailio these args are not there. Im not sure why > you are > *>>>* >running with kamailio command directly. Why don't you add your init > *>>>* script > *>>>* >to the appropriate runlevel for auto startup? > *>>>* > > *>>>* >Cheers > *>>>* >Jason > *>>>* > *>>>* On Wed, Feb 1, 2012 at 3:06 PM, Uri Shacked <ushacked at gmail.com< > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> > *>>>* wrote: > *>>>* > *>>>* >* Hi again.... > *>>>* *>* > *>>>* *>* i installed kamailio 3.2.2 today. > *>>>* *>* i used the chkconfig tool to get kamailio run at boot. > *>>>* *>* i edited both /etc/init.d/kamailio and /etc/default/kamailio > files > *>>>* to run > *>>>* *>* with 2048Mg of memory. > *>>>* *>* now, when i run /etc/init.d/kamailio start, it starts with the > right > *>>>* *>* amount of memory. > *>>>* *>* when i rum "kamailio" only, it starts with 32Mb.... > *>>>* *>* > *>>>* *>* i use centos 6.2 64bit. > *>>>* *>* any ideas? > *>>>* *>* > *>>>* *>* > *>>>* *>* > *>>>* *>* > *>>>* *>* > *>>>* *>* On Tue, Oct 25, 2011 at 1:18 PM, Uri Shacked <ushacked at > gmail.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> > *>>>* wrote: > *>>>* *>* > *>>>* *>>* Hi. > *>>>* *>>* I already checked it all. The kamailio start and stop command > did > *>>>* not > *>>>* *>>* work. The init script i used was for debian. Now i use another > *>>>* script, > *>>>* *>>* for centos. It works. I add the kamailio proccess with > chkconfig > *>>>* tool. > *>>>* *>>* Thanks. > *>>>* *>>* > *>>>* *>>* On 10/25/11, Sammy Govind <govoiper at gmail.com< > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> > *>>>* wrote: > *>>>* *>>* > Thanks Alex, > *>>>* *>>* > > *>>>* *>>* > Hey Uri, can you check if you've /etc/init.d/kamailio file > *>>>* exists - open > *>>>* *>>* > that file if exists and cross verify few parameters. > *>>>* *>>* > Few of these are as follows > *>>>* *>>* > > *>>>* *>>* > PATH=/sbin:/bin:/usr/sbin:/usr/bin > *>>>* *>>* > DAEMON=*/usr/local/sbin/kamailio* > *>>>* *>>* > NAME=kamailio > *>>>* *>>* > DESC=kamailio > *>>>* *>>* > HOMEDIR=/var/run/ > *>>>* *>>* > *PIDFILE*=$HOMEDIR/$NAME.pid > *>>>* *>>* > DEFAULTS=*/etc/default/kamailio.default* > *>>>* *>>* > RUN_KAMAILIO=yes > *>>>* *>>* > > *>>>* *>>* > Make sure /etc/default/kamailio.default file exits. here are > the > *>>>* *>>* contents of > *>>>* *>>* > my file. > *>>>* *>>* > > *>>>* *>>* > RUN_KAMAILIO=yes > *>>>* *>>* > USER=kamailio > *>>>* *>>* > GROUP=kamailio > *>>>* *>>* > MEMORY=64 > *>>>* *>>* > DUMP_CORE=no > *>>>* *>>* > > *>>>* *>>* > On Tue, Oct 25, 2011 at 3:38 AM, Klaus Darilion < > *>>>* *>>* > klaus.mailinglists at pernau.at< > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> > *>>>* wrote: > *>>>* *>>* > > *>>>* *>>* >> Test the startupscript if they work: > *>>>* *>>* >> > *>>>* *>>* >> /etc/init.d/kamailio start > *>>>* *>>* >> /etc/init.d/kamailio stop > *>>>* *>>* >> > *>>>* *>>* >> If this works, then make sure to have proper symlinks from > the > *>>>* *>>* >> corresponding runlevel to the startup script. Do it > manually or > *>>>* use the > *>>>* *>>* >> chkconfig tool. > *>>>* *>>* >> > *>>>* *>>* >> klaus > *>>>* *>>* >> > *>>>* *>>* >> > *>>>* *>>* >> On 24.10.2011 08:00, Uri Shacked wrote: > *>>>* *>>* >> > *>>>* *>>* >>> hi again, > *>>>* *>>* >>> i found out that on my centos 5.4 the command > *>>>* start-stop-daemon that > *>>>* *>>* the > *>>>* *>>* >>> /etc/init.d/kamailio uses is not recognized. > *>>>* *>>* >>> it is kamailio3.2 any ideas? > *>>>* *>>* >>> > *>>>* *>>* >>> > *>>>* *>>* >>> On Mon, Oct 24, 2011 at 3:03 PM, Uri Shacked <ushacked at > *>>>* gmail.com< > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> > *>>>* *>>* >>> <mailto:ushacked at gmail.com< > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>>> > *>>>* wrote: > *>>>* *>>* >>> > *>>>* *>>* >>> Hi, > *>>>* *>>* >>> what is the best way to start kamailio at boot? > *>>>* *>>* >>> the example in the install is not working for me.... > *>>>* *>>* >>> > *>>>* *>>* >>> > *>>>* * > *>>>* > *>>* > *>>* This email is subject to the disclaimer of Smile Communications > (PTY) Ltd. at http://www.smilecoms.com/disclaimer > *>>* > *>>* > *>* > * > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing > listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > -- > Daniel-Constantin Mierla -- > http://www.asipto.comhttp://linkedin.com/in/miconda -- > http://twitter.com/miconda > >
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
