I installed with those instructions once... from scratch.... I thought mayby there is a quicker way (like update in windows msi..... :-)) when my system is already configured nicely..
Thanks, I must say i think kamailio is great !! a real SIP application server, perfect for many implementations. Cheers! On Mon, Dec 12, 2011 at 2:51 PM, Daniel-Constantin Mierla <mico...@gmail.com > wrote: > Hello, > > > On 12/12/11 1:35 PM, Uri Shacked wrote: > > > thanks, > > since i am not so good with linux... :-( sorry.... > after doing GIT like : > > # git clone –depth 1 git://git.sip-router.org/sip-router kamailio > # cd kamailio > # git checkout -b 3.2 origin/3.2 > # make FLAVOUR=kamailio cfg > > what do i do next? > make install? > > > yes, make install. You can read a tutorial about installing kamailio 3.2 > from git at: > > * http://www.kamailio.org/wiki/install/3.2.x/git > > Cheers, > Daniel > > > On Mon, Dec 12, 2011 at 12:18 PM, Daniel-Constantin Mierla < > mico...@gmail.com> wrote: > >> Hello, >> >> you have to upgrade to 3.2.1 (or use the latest git branch 3.2). The >> current keepalive mechanism was refactored a bit after the release of >> 3.2.0, as they were overlapping cases. >> >> Cheers, >> Daniel >> >> >> On 12/12/11 11:13 AM, Uri Shacked wrote: >> >> version : >> >> version: kamailio 3.2.0 (i386/linux) e19bb8 >> flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, >> DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, >> DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, >> USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES >> ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, >> MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB >> poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. >> id: e19bb8 >> compiled on 18:43:11 Oct 24 2011 with gcc 4.1.2 >> and with log level 3 : >> 13(11897) ERROR: <script>: OSPRPL is 408 now disable destination >> 13(11897) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] >> l=1266 a=26 n=ds_mark_dst >> 13(11897) DEBUG: dispatcher [dispatch.c:1994]: mode [1] grp [47] dst [ >> sip:10.10.21.28] >> 13(11897) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] >> l=1267 a=26 n=xlog >> 13(11897) ERROR: <script>: after disabling destination >> >> On Mon, Dec 12, 2011 at 11:14 AM, Daniel-Constantin Mierla < >> mico...@gmail.com> wrote: >> >>> Hello, >>> >>> cn you give output of 'kamailio -V' and the log messages with debug=3 in >>> config file? >>> >>> Note that from the moment you set the gateway in some state and you dump >>> the list via mi, there can be keepalives that change the state. >>> >>> Cheers, >>> Daniel >>> >>> >>> On 12/11/11 3:42 PM, Uri Shacked wrote: >>> >>> Hi, >>> >>> i tried to change the ds_probing_mode as well. it didn't do any good. >>> i need the probing mode to be set to 1 anyway. >>> >>> so, >>> any ideas? >>> >>> here is the cfg again: >>> >>> after the failure route i turn to this route >>> >>> "route[OSPRPLERR] { >>> xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n"); >>> if($avp(OSPRPL)!=404) { >>> xlog("$C(rg) OSPRPL is $avp(OSPRPL)* now disable destination*$C(xx)\n"); >>> ds_mark_dst("AP"); >>> xlog("$C(rg) *after disabling destination* $C(xx)\n"); >>> }" >>> >>> >>> here is the log: >>> >>> 13(5760) ERROR: <script>: SCRIPT : in OSPRPLERR >>> sip:36264529@10.10.21.29 >>> 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] >>> l=1264 a=17 n=if >>> 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] >>> l=1259 a=26 n=xlog >>> 13(5760) ERROR: <script>: OSPRPL is 408 *now disable destination >>> *13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] >>> l=1260 a=26 n=ds_mark_dst >>> 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] >>> l=1261 a=26 n=xlog >>> 13(5760) ERROR: <script>: *after disabling destination* >>> >>> now i check the dispatcher list status: >>> >>> kamctl fifo ds_list >>> >>> SET:: 47 >>> URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4 >>> URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3 >>> URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2 >>> URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1 >>> SET:: 41 >>> URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4 >>> URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3 >>> URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1 >>> URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2 >>> >>> >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing >>> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>> >>> >>> -- >>> Daniel-Constantin Mierla -- >>> http://www.asipto.comhttp://linkedin.com/in/miconda -- >>> http://twitter.com/miconda >>> >>> >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing >> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> >> -- >> Daniel-Constantin Mierla -- >> http://www.asipto.comhttp://linkedin.com/in/miconda -- >> http://twitter.com/miconda >> >> > > -- > Daniel-Constantin Mierla -- > http://www.asipto.comhttp://linkedin.com/in/miconda -- > http://twitter.com/miconda > >
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
