Hi Daniel. I just wanted to hear if you have had any time to look at the Kamailio Dispatcher <-> FreeSwitch problem?
This is NOT to rush you. I've followed the mailing list and can see how busy you are and how much involved you are in all this, so I fully respect all the help you give to this mailing list etc. Best regards, Henrik 2011/10/20 Henrik Aagaard Sørensen <henrikaagaardsoren...@gmail.com> > Hi Daniel. > > I've just upgraded to 3.2.0. > > This is my NEW kamailio.cfg: http://pastebin.com/XzXjf1VY > This is my dispatcher.list: http://pastebin.com/9dLS8243 > > I've also attached a ngrep where it errors with "Too many hops" with the > new version 3.2.0. > > Once again, I really appreciate all the help you give! It's remarkable > with your effort in this. > > Best regards, > Henrik > > > 2011/10/17 Daniel-Constantin Mierla <mico...@gmail.com> > >> I will try to look over the sip traces you sent, although it is tight >> schedule for the 3.2.0 right now -- so it may take few days. >> >> Cheers, >> Daniel >> >> >> On 10/14/11 10:07 PM, Henrik Aagaard Sørensen wrote: >> >> Yes, pbx.my-domain.com is pointing to the IP of FreeSwitch. >> sip.my-domain.com is the domain name for Kamailio. >> >> 2011/10/14 Daniel-Constantin Mierla <mico...@gmail.com> >> >>> >>> >>> On 10/14/11 7:06 PM, Henrik Aagaard Sørensen wrote: >>> >>> My dispatcher.list currently just contains: >>> 1 pbx.my-domain.com:5060 >>> >>> Is pbx.my-domain.com pointing to the IP address of freeswitch? What is >>> the domain name for kamailio ip address? >>> >>> Daniel >>> >>> >>> >>> I will provide a ngrep trace within an hour or two. Thank you so much >>> for helping me. I really hope to get this solved. >>> >>> 2011/10/14 Daniel-Constantin Mierla <mico...@gmail.com> >>> >>>> Hello, >>>> >>>> >>>> On 10/14/11 4:48 PM, Henrik Aagaard Sørensen wrote: >>>> >>>> Hi Daniel (and everyone else) again. >>>> >>>> I've just tried to add: >>>> loadmodule "path.so" >>>> modparam("path", "use_received", 1) >>>> >>>> and: >>>> add_path_received() >>>> just before the "if(!t_relay())..." in the ROUTE part. >>>> >>>> That made both devices get the error "Too many loops". >>>> >>>> what is the content of the dispatcher list file? Maybe is better to >>>> use ds_select_domain(...) and ds_next_domain() -- cannot say it since I >>>> haven't seen full sip trace, but maybe the problem is that freeswitch is >>>> sending back if the r-uri address is kamailio's address. >>>> >>>> Cheers, >>>> Daniel >>>> >>>> >>>> >>>> Moving the add_path_received() into the part: >>>> if (nat_uac_test("19")) { if (method=="REGISTER") { >>>> fix_nated_register(); add_path_received(); >>>> made the same issues as before loading the path.so module. >>>> >>>> 2011/10/14 Henrik Aagaard Sørensen <henrikaagaardsoren...@gmail.com> >>>> >>>>> Hi Daniel (and everyone else). >>>>> >>>>> This is a tshark trace (is that as good as ngrep?) from Kamailio when >>>>> there are too many loops: http://pastebin.com/yRjduB0s >>>>> In this trace I got the note that 253 packets was dropped (and >>>>> therefor not in the trace). >>>>> >>>>> And this is a trace when it times out: http://pastebin.com/KT0bJzEU >>>>> >>>>> I've actually looked at the PATH module, and tried several things. And >>>>> I know this type of question is rather newbee-like, but can you help me >>>>> out >>>>> with the PATH module and how to integrate it correctly? >>>>> >>>>> I really do appreciate all the help! >>>>> >>>>> >>>>> 2011/10/14 Daniel-Constantin Mierla <mico...@gmail.com> >>>>> >>>>>> Hello, >>>>>> >>>>>> when using the load balancer in front of the registrar, you have to >>>>>> use PATH extensions for SIP (see path module in kamailio) in order to be >>>>>> able to cope with nat. >>>>>> >>>>>> Then, what would be helpful, will be a ngrep trace taken on kamailio >>>>>> server for failed calls. >>>>>> >>>>>> Cheers, >>>>>> Daniel >>>>>> >>>>>> >>>>>> On 10/14/11 4:13 PM, Henrik Aagaard Sørensen wrote: >>>>>> >>>>>> I've asked a lot of question about Kamailio Dispatcher in front of >>>>>> FreeSwitch in this mailing list. So I'm sorry that I'm still "spamming", >>>>>> but it still fails. >>>>>> >>>>>> This is my status so far. >>>>>> >>>>>> When connecting 2 devices directly to FreeSwitch everything works. >>>>>> When connecting to Kamailio, some calls fails with "Timeout" and some >>>>>> fails >>>>>> with "Too many loops". >>>>>> >>>>>> This is my kamailio.cfg: http://pastebin.com/KEuZmikh >>>>>> >>>>>> When connected directly to FreeSwitch where everything works, this is >>>>>> how my clients are registrered in FreeSwitch: >>>>>> http://pastebin.com/prkjkb7g >>>>>> >>>>>> When connected to Kamailio where nothing works, this is how my >>>>>> clients are registrered in FreeSwitch: http://pastebin.com/b5x6NZyv >>>>>> >>>>>> 215.197.145.132 (sip.my-domain.com) is my Kamailio. >>>>>> pbx.my-domain.com is my FreeSwitch. >>>>>> 96.224.14.164 is my IP at home, where my 2 devices are from. >>>>>> >>>>>> Can anyone help me out? I'm kinda lost at this point. >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing >>>>>> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>>>> >>>>>> >>>>>> -- >>>>>> Daniel-Constantin Mierla -- http://www.asipto.com >>>>>> Kamailio Advanced Training, Dec 5-8, Berlin: >>>>>> http://asipto.com/u/kathttp://linkedin.com/in/miconda -- >>>>>> http://twitter.com/miconda >>>>>> >>>>>> >>>>> >>>> >>>> >>>> _______________________________________________ >>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing >>>> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>> >>>> >>>> -- >>>> Daniel-Constantin Mierla -- http://www.asipto.com >>>> Kamailio Advanced Training, Dec 5-8, Berlin: >>>> http://asipto.com/u/kathttp://linkedin.com/in/miconda -- >>>> http://twitter.com/miconda >>>> >>>> >>> >>> >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing >>> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>> >>> >>> -- >>> Daniel-Constantin Mierla -- http://www.asipto.com >>> Kamailio Advanced Training, Dec 5-8, Berlin: >>> http://asipto.com/u/kathttp://linkedin.com/in/miconda -- >>> http://twitter.com/miconda >>> >>> >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing >> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> >> -- >> Daniel-Constantin Mierla -- http://www.asipto.com >> Kamailio Advanced Training, Dec 5-8, Berlin: >> http://asipto.com/u/kathttp://linkedin.com/in/miconda -- >> http://twitter.com/miconda >> >> >
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
