On 16.09.2011 12:00, Phillman25 Kyriacou wrote: > Could you please explain in a little more detail how to compile Kamailio > with debug symbols? > Do i use the command make CFLAGS=-g ? > then make QUIET=no all?
I always add "mode=debug" to make, e.g.: make mode=debug <my other make options> HTH, --Timo > On Thu, Sep 15, 2011 at 5:02 PM, marius zbihlei <marius.zbih...@1and1.ro > <mailto:marius.zbih...@1and1.ro>> wrote: > > On 09/14/2011 07:40 PM, Phillman25 Kyriacou wrote: > > Hello > > Here is the output of the gdb commands: > > (gdb) core core > [New Thread 18567] > Core was generated by `/usr/local/sbin/kamailio -P > /var/run/kamailio/kamailio.pid -m 64 -u root -g roo'. > Program terminated with signal 6, Aborted. > #0 0x0040a422 in __kernel_vsyscall () > . > . > . > > (gdb) bt full > #0 0x0040a422 in __kernel_vsyscall () > No symbol table info available. > #1 0x0056a651 in ?? () > No symbol table info available. > #2 0x00695ff4 in ?? () > No symbol table info available. > #3 0x0056da82 in ?? () > No symbol table info available. > #4 0x00000006 in ?? () > No symbol table info available. > #5 0xbff91960 in ?? () > > > Hello, > This is not very helpful as the debug symbols weren't loaded. You > have to compile Kamailio with debug symbols (make sure the -g flag > is passed to CFLAGS when compiling) and then reload the core (it is > not mandatory to generate another one ) > > make QUIET=no (to see the flags) > > Also don't strip the executable > > > Marius _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
