Hey,
we use the following:
modparam("siptrace", "trace_flag", 22)
[..]
route {
[..]
# set the Flag for siptrace to log the messages in tm module
setflag(22);
# handle requests within SIP dialogs
route(WITHINDLG);
### only initial requests (no To tag)
[..]
# With setflag(22) the first Message is not traced. Trace it
here
sip_trace();
[..]
This works fine when you do not use forward().
Kind regards
Timo Klecker
Von: sr-users-boun...@lists.sip-router.org
[mailto:sr-users-boun...@lists.sip-router.org] Im Auftrag von Peter Kaszas
Gesendet: Donnerstag, 28. Juli 2011 22:28
An: sr-users@lists.sip-router.org
Betreff: [SR-Users] problem with siptrace outgoing SIP message logging
Dear List members,
Im quite new to kamailio, and i got a problem with the siptrace module. I
read that siptrace module can capture and log all incoming and outgoing sip
messages.
So i put to the config file the following lines:
loadmodule "siptrace.so"
.
.
.
#-------- siptrace paramas -----
modparam("siptrace", "db_url", DBURL)
modparam("siptrace", "table", "sip_trace")
modparam("siptrace", "trace_flag", 18)
modparam("siptrace", "trace_on", 1)
modparam("siptrace", "trace_sl_acks", 1)
.
.
. route {
sip_trace();
.......
}
Now I can capture all incoming SIP messages, but I none of the outgoing.
Where can I put the sip_trace(); command to capture also the outgoing
messages?
Thank you,
Peter
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
