Hi, 

I am trying to get kamailio (or more specific rtpproxy) to play a wav file when 
a call is setup 

In kamailio.cfg I have added the command in the onreply_route 

rtpproxy_startrecording(); 
rtpproxy_stream2uas("/var/log/rtpproxy/message","-1"); 

I am sure the command is executed and given from kamailio to rtpproxy because 
in syslog I see following output (using dbug output of rtpproxy) 

rtpproxy[2648]: DBUG:handle_command: received command "P-1 
024a73d95bbe016014de647e700 /var/log/rtpproxy/behappy session 487095817;1 
024a73d95bbe015f14de647e700;1" 
rtpproxy[2648]: DBUG:doreply: sending reply "E6#012" 
rtpproxy[2648]: DBUG:handle_command: received command "R 
024a73d95bbe016014de647e700 487095817 024a73d95bbe015f14de647e700" 
rtpproxy[2648]: DBUG:doreply: sending reply "0#012" 

The "R" command is the startrecording command and that is indeed working 
perfect. (recording to /var/log/rtpproxy) 
The "P" command is the "Playing or stream2uas" command. Seems that the message 
rtpproxy gets differs a bit from the one I found in the rtpproxy manual 

from the manual : 


P[args] callid play_name codecs from_tag to_tag 

Direction of the playback is defined by the order of the from_tag and to_tag 
parameters. 


R callid from_tag to_tag 







I have used the command " makeann behappy.wav behappy" to convert a wavfile. It 
gave me a .0 and .a file which I have placed in the /var/log/rtpproxy directory 
(makeann comes with the rtpproxy source and is rather a bit shy with 
information to say the least ;) ) 







There is not too much information or examples found about this so I was hoping 
maybe somebody on this list could help me in finding out why i'm not getting 
more information in syslog and why i'm not hearing the audiofile. 




Best regards 









_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Reply via email to