I am trying to port our setup from kamailio 1.4.3 to 3.1.4 and I see huge
differences on the LCR module.
I have these main questions:
1- does lcr_id replaces the grp_id?
2- what happened to the fifo commands to add gws etc:
lcr addgw <gw_name> <ip> <port> <scheme> <transport> <grp_id> <flags> <tag>
<strip>
............... add a gateway with flags, tag and strip ............
................(flags, tag, and strip are optional arguments) .....
lcr rmgw <gw_name> ..........................................................
............... delete a gateway
lcr addroute <prefix> <from> <grp_id> <prio> .................................
.............. add a route ( use '' to match anything in <from> )
lcr rmroute <prefix> <from> <grp_id> <prio> .................................
.............. delete a route
3- it looks like the kamctl fifo lcr reload can not be used anymore, instead I
found that there is a sercmd command that can be used to "show" and "reload"
only the lcr tables
What would be the best way to use this module on this version?
Any help/hint would be greatly appreciated.
thank you
fborot
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
[email protected]
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
