Hi, did you also set
#!define WITH_NAT at the beginning of your config? That should do the job. Carsten 2011/6/24 MingHon <gming...@gmail.com>: > hey list, > > i currently test on my asterisk 1.6 box on on pc with private ip > and tested kamailio 3.1.3/3.1.4 + rtpproxy 1.2.1/1.2.0/1.1 on another pc > with public ip and private ip. > everything installed successfully. i follow this tutorial realtime > intergration with asterisk > http://kb.asipto.com/asterisk:realtime:kamailio-3.1.x-asterisk-1.6.2-astdb > > my config. > rtpproxy -l publicip -s udp:127.0.0.1:7722 -u user > > #!define WITH_NAT > modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") > modparam("nathelper", "sipping_from", "sip:pinger@publicip") > nat_uac_test("19") > # uncomment next line to do SIP NAT pinging > setbflag(FLB_NATSIPPING); > is my config correct? > may i know the best version work out from the box? > please advice.. > thanks in adv. :) > -- > Regards, > > MingHon > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > -- Carsten Bock http://www.ng-voice.com mailto:cars...@ng-voice.com Schomburgstr. 80 22767 Hamburg Germany Mobile +49 179 2021244 Office +49 40 34927219 Fax +49 40 34927220 _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
