Try the nat_traversal module: http://www.kamailio.org/docs/modules/3.1.x/modules_k/nat_traversal.html It should handle this kind of scenarios.
Regards, Ovidiu Sas On Fri, May 13, 2011 at 6:49 AM, Asgaroth <00asgarot...@gmail.com> wrote: > Hi All, > > I have a scenario where our registrar's are sitting behind our sip > proxy. The sip proxy is the only system that has access to the outside > world. Our registrar's are all on internal private addresses. > > I am trying to configure our registrar's to perform nat pinging. > However, because the registrar's are on an internal address there is > no way for the nat ping to get out. I enabled the path option so that > the registrar stores the path that the registration comes in on. > However it doesnt seem like the nathelper module uses the path > parameter to send the outgoing nat ping. I tried the nat ping using > sip method INFO, but the same applies, it does not appear to be able > to send out via the outbound proxy. > > I tried to enable the natping option on the sip proxy, but it appears > that only registrations with a socket address of the local host will > get pinged, or else it is ignored. > > Is there an option that I am missing for the nat helper module that > will enable me to set an outbound proxy for the nat ping messages? > > Any insight would be appreciated. > > Thanks > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
