Again for testing, I pointed Kamailio directly to my billing radius,
bypassing Freeradius. The situation is the same, so the problem is
definitely not with the Freeradius server.
2011/3/5 Kosilov Fedor <dangerko...@gmail.com>
> Hello, Daniel, thank you for your attention to my problem.
>
> I actually don't need accounting support, I just want to implement an
> authorization using radius.
> But for testing purposes, I loaded the acc module and set "radius_extra"
> param. Nothing has changed.
>
> Here is a part of my config:
>
>
> ...
> modparam("acc", "radius_config", "/etc/radiusclient-ng/radiusclient.conf")
> modparam("acc", "radius_extra", "User-Name=$Au")
> ...
> modparam("auth_radius", "radius_config",
> "/etc/radiusclient-ng/radiusclient.conf")
> modparam("auth_radius", "auth_extra", "NAS-Identifier=$var(ident)")
> ...
> route {
> #Definitions
> $var(ident) = "kamserv.example.com";
> ...
> route(3); #Auth
> ...
> }
>
> ...
>
> route[3] {
> if (is_method("REGISTER"))
> {
> if (is_from_local()) {
> if (!radius_www_authorize("$td"))
> {
> www_challenge("$sel(to.uri.host)", "1");
> exit;
> } else {
>
> avp_db_delete("$sel(to.uri)","$avp(s:ip)");
>
> avp_db_delete("$sel(to.uri)","$avp(s:dpid)");
>
> avp_db_delete("$sel(to.uri)","$avp(s:fr_timer)");
>
> avp_db_delete("$sel(to.uri)","$avp(s:calls_limit)");
>
> avp_db_store("$sel(to.uri)","$avp(s:ip)");
>
> avp_db_store("$sel(to.uri)","$avp(s:dpid)");
>
> avp_db_store("$sel(to.uri)","$avp(s:fr_timer)");
>
> avp_db_store("$sel(to.uri)","$avp(s:calls_limit)");
>
> if
> ($au!=$sel(to.uri.user))||($au!=$sel(from.uri.user)) {
> sl_send_reply("403","Forbidden auth
> ID");
> exit;
> } else {
> if ($avp(s:ip)!='any' &&
> $sel(src.ip)!=$avp(s:ip)) {
>
> sl_send_reply("403","Forbidden");
> exit;
> }
> }
> }
>
> } else {
> sl_send_reply("403","Forbidden");
> exit;
> }
> } else {
> if ($sel(src.ip)=="192.168.0.2") {
> return;
> } else if (is_from_local()) {
> if
> (!radius_proxy_authorize("$sel(from.uri.host)","$sel(from.uri.user)")) {
> proxy_challenge("$sel(from.uri.host)",
> "1");
> exit;
> }
> if ($avp(s:ip)!='any' && $sel(src.ip)!=$avp(s:ip))
> {
> sl_send_reply("403","Forbidden");
> exit;
> }
>
> if (is_method("PUBLISH"))
> {
> if ($au!=$sel(to.uri.user)) {
> sl_send_reply("403","Forbidden auth
> ID");
> exit;
> }
> } else if ($au!=$sel(from.uri.user)) {
> sl_send_reply("403","Forbidden auth ID");
> exit;
> }
> consume_credentials();
> } else {
> sl_send_reply("403","Forbidden");
> exit;
> }
> }
> }
> ...
>
> And again a part of the freeradius log:
>
> rad_recv: Access-Request packet from host 127.0.0.1 port 58933, id=135,
> length=298
>
> *User-Name = "2219...@example.com"*
> Digest-Attributes = 0x0a0932323139303031
> Digest-Attributes = 0x01106c696e6b2d726567696f6e2e7275
> Digest-Attributes =
> 0x0222545848676630317833314f7076767759512b6b73674c63554d51784f6c347634
>
> Digest-Attributes = 0x04147369703a6c696e6b2d726567696f6e2e7275
> Digest-Attributes = 0x030a5245474953544552
> Digest-Attributes = 0x050661757468
> Digest-Attributes = 0x090a3030303030303031
> Digest-Attributes = 0x080c39636238383130616531
> Digest-Response = "efdcf92b58f694b97928856614057436"
>
> Service-Type = Sip-Session
> Sip-Uri-User = "2219001"
> *User-Name = "call-id=zomdnicqsndxrnh@koffe-work"*
>
> NAS-Identifier = "kamserv.example.com"
> NAS-Port = 5060
> NAS-IP-Address = 127.0.0.1
>
>
> Regards,
> Fedor.
>
>
>
> 2011/3/5 Daniel-Constantin Mierla <mico...@gmail.com>
>
> Hello,
>>
>> what is the value of parameter radius_extra for acc module?
>>
>> Cheers,
>> Daniel
>>
>>
>> On 3/4/11 1:06 PM, Kosilov Fedor wrote:
>>
>> Hello List!
>>
>> I'm trying to set up authorization with our billing proprietary radius
>> server, using Freeradius as a proxy. Currently I'm experiencing the
>> following problem:
>>
>> The Access-Request packet, sent by Kamailio, contains two User-Name
>> attribute records
>> Here is a log from the Freeradius server:
>>
>> rad_recv: Access-Request packet from host 127.0.0.1 port 59294, id=112,
>> length=298
>> User-Name = "2219...@example.com"
>> Digest-Attributes = 0x0a0932323139303031
>> Digest-Attributes = 0x01106c696e6b2d726567696f6e2e7275
>> Digest-Attributes =
>> 0x022254584452634531773045524b7368796f30684a70544f4f6a69424d386b32534a
>> Digest-Attributes = 0x04147369703a6c696e6b2d726567696f6e2e7275
>> Digest-Attributes = 0x030a5245474953544552
>> Digest-Attributes = 0x050661757468
>> Digest-Attributes = 0x090a3030303030303031
>> Digest-Attributes = 0x080c32383034636535373032
>> Digest-Response = "e79b47955c02401fe52d05f7956609aa"
>> Service-Type = Sip-Session
>> Sip-Uri-User = "2219001"
>> * User-Name = "call-id=domcmqmnychbwlp@koffe-work"*
>> NAS-Identifier = "kamserv.example.com"
>> NAS-Port = 5060
>> NAS-IP-Address = 127.0.0.1
>> # Executing section authorize from file
>> /etc/freeradius/sites-enabled/default
>> +- entering group authorize {...}
>> ++[preprocess] returns ok
>> ++[chap] returns noop
>> ++[mschap] returns noop
>> [digest] Checking for correctly formatted Digest-Attributes
>> [digest] Digest-Attributes look OK. Converting them to something more
>> usful.
>> Digest-User-Name = "2219001"
>> Digest-Realm = "example.com"
>> Digest-Nonce = "TXDRcE1w0ERKshyo0hJpTOOjiBM8k2SJ"
>> Digest-URI = "sip:example.com"
>> Digest-Method = "REGISTER"
>> Digest-QOP = "auth"
>> Digest-Nonce-Count = "00000001"
>> Digest-CNonce = "2804ce5702"
>> [digest] Adding Auth-Type = DIGEST
>> ++[digest] returns ok
>> [suffix] Looking up realm "example.com" for User-Name = "
>> 2219...@example.com"
>> [suffix] Found realm "example.com"
>> [suffix] Adding Realm = "example.com"
>> [suffix] Proxying request from user 2219001 to realm example.com
>> [suffix] Preparing to proxy authentication request to realm "example.com"
>>
>> ++[suffix] returns updated
>> [eap] No EAP-Message, not doing EAP
>> ++[eap] returns noop
>> ++[files] returns noop
>> ++[expiration] returns noop
>> ++[logintime] returns noop
>> ++[pap] returns noop
>> Sending Access-Request of id 250 to 127.0.0.1 port 1822
>> User-Name = "2219...@example.com"
>> Digest-Attributes = 0x0a0932323139303031
>> Digest-Attributes = 0x01106c696e6b2d726567696f6e2e7275
>> Digest-Attributes =
>> 0x022254584452634531773045524b7368796f30684a70544f4f6a69424d386b32534a
>> Digest-Attributes = 0x04147369703a6c696e6b2d726567696f6e2e7275
>> Digest-Attributes = 0x030a5245474953544552
>> Digest-Attributes = 0x050661757468
>> Digest-Attributes = 0x090a3030303030303031
>> Digest-Attributes = 0x080c32383034636535373032
>> Digest-Response = "e79b47955c02401fe52d05f7956609aa"
>> Service-Type = Sip-Session
>> Sip-Uri-User = "2219001"
>> * User-Name = "call-id=domcmqmnychbwlp@koffe-work"*
>> NAS-Identifier = "kamserv.example.com"
>> NAS-Port = 5060
>> NAS-IP-Address = 127.0.0.1
>> Proxy-State = 0x313132
>> Proxying request 1 to home server 127.0.0.1 port 1822
>>
>> As I understand, this second User-Name attribute has to be a call-id
>> attribute.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users@lists.sip-router.org
>>
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>> --
>> Daniel-Constantin Mierla
>> http://www.asipto.com
>>
>>
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
