Do you see PUBLISH requests with Event: dialog? Note: those will be sent by pua_dialoginfo module to Kamailio itslef, thus will be sent on the loopback interface. You should see them with "ngrep -d any port 5060"
klaus Am 09.02.2011 14:16, schrieb Spinov Evgeniy: > Hello all. > > I'm having problem with sending NOTIFY packet for event dialog. > > The problem is, that all NOTIFY packets sent with this event is empty. > ( Content-length: 0 ) and in fact, not passing actual status to the > phone. In my case this is SPA962. > > NOTIFY packets for event presence are sent fine and status is changing > normally. > > The same phone, works fine with Asterisk. Asterisk is sending NOTIFY > with non-zero content and changing status for the subscriber as well. > > I've turned on pua module to send PUBLISH requests at Kamailio, it's > filling DB table with subscription, everything runs fine and NOTIFY > packets are coming to subscribed phone, but they are empty. > > I also have presence_dialoginfo module on and pua_dialoginfo module on. > I've tried on Kamailio 3.0.3 and 3.1.1. Content always empty. > > There is no sense of pasting here packet dumps, cause everything is like > should be: > > (UAC) SUBSCRIBE, event: presence ---> K > K ---> 202 OK > (SPA) SUBSCRIBE, event: dialog ---> K > K ---> 202 OK > PUBLISH, event: presence ---> K > K ---> 200 OK > NOTIFY, event: presence, Content-Length: XXX ---> UAC > NOTIFY, event: dialog, Content-Length: 0 ---> SPA962 > > As result, softphone changes status and hardphone ( SPA962 ) - no. May > be it's cause of PUBLISH event value? > > Please advise. > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
