Hello,
run kamailio from console with -E -ddd command line parameters and read
the printed log messages. You should be able to figure out whether is
reaching authentication part of configuration file. Also, adding
xlog(...) calls in config file might be useful for you to troubleshoot.
From the logs you sent, looks like auth db is enabled. Maybe the
from/r-uri don't match myself condition, are you using hostnames or IP
addresses?
Cheers,
Daniel
On 12/14/10 9:06 PM, Graham Wooden wrote:
Some more insight here. This time I did a distclean on the src, and
followed the step-by-step from the GIT stable branch page (opposed to
reference any other sources).
I restarted kamailio now I am seeing more MySQL connectivity - but no
queries to check the subscriber table upon authenticating. That
select against the location table I believe was a result from me doing
a "kamctl ul show".
This is what MySQL is seeing. Any thoughts?
101214 13:44:10 37 Connect open...@localhost on openser
37 Query select table_version from version
where table_name='location'
37 Query select username from location
where username='dummy_user'
37 Quit
38 Connect open...@localhost on openser
38 Query select table_version from version
where table_name='subscriber'
38 Quit
39 Connect open...@localhost on openser
39 Query select table_version from version
where table_name='subscriber'
39 Quit
40 Connect open...@localhost on openser
40 Query select
username,contact,expires,q,callid,cseq,flags,cflags,user_agent,received,path,socket,methods,last_modified
from location
41 Connect open...@localhost on openser
42 Connect open...@localhost on openser
43 Connect open...@localhost on openser
44 Connect open...@localhost on openser
45 Connect open...@localhost on openser
46 Connect open...@localhost on openser
47 Connect open...@localhost on openser
48 Connect open...@localhost on openser
49 Connect open...@localhost on openser
50 Connect open...@localhost on openser
51 Connect open...@localhost on openser
Quoting Graham Wooden <gra...@g-rock.net>:
Thanks for the reply Daniel.
That was one of the docs that I was referred to, and those defines were
added. I have this towards the top of the cfg file (above the
if/elses):
#!define WITH_MYSQL
#!define WITH_AUTH
#!define WITH_USRLOCDB
#!define WITH_DEBUG
#!define WITH_ACCDB
I turned up mysql query logging, and I don't see kamailio attempting to
query MySQL. All I get so far is this:
101214 6:53:25
1 Connect unknown_mysql...@localhost as anonymous on
1 Quit
I can the phone trying every 10-15 seconds to register...
So, I am definitely missing a piece, somewhere, to tie in MySQL during
runtime. Which is weird, since I was able to use the kamdbctl to
create the
DB and kamctl to add the user. Nothing else was really
altered/removed from
the cfg, it's pretty much default right now.
Thanks for any guidance.
-graham
On 12/14/10 4:02 AM, "Daniel-Constantin Mierla" <mico...@gmail.com>
wrote:
Hello,
On 12/14/10 6:31 AM, Graham Wooden wrote:
Hi folks,
Getting ready to stage my 1.4.2 upgrade to 3.1.1 - but apparently I am
missing something pretty basic here as I can't get a test subscriber
registered. Turned up debug and viewed the "401 Unauthorized"
repeating
messages.
So I combed back through the INSTALL and the various references on
kamailio.org. And for full disclosure, here are the relevant steps
that I
have took:
Did a make clean on the source and re-did the make, which looks like:
make FLAVOUR=kamailio group_include="standard mysql"
include_modules="carrierroute acc mi_fifo kex tmx pv siputils
mi_rpc" cfg
all install
Added my domain into kamctlrc.
Created a fresh DB, started up kamailio and added a user:
[r...@qa-voip-01 kamailio-3.1.1]# kamctl add testnumber testpass
new user 'testnumber' added
Made the appropriate changes to the default kamailio.cfg by adding
in the
defines. Restarted kamailio - no errors and all looked good.
At this point, all indications would think that I can get the
subscriber
registered and get the location table updated ... But no such luck:
[r...@qa-voip-01 kamailio]# kamctl ul show
Domain:: location table=512 records=0 max_slot=0
Any thoughts on where to look? I have confirmed that the
subscriber device
is using the right credentials. Using plaintext and the password is in
user's row in the subscriber table.
I am sure it's something pretty basic; this is my first stab at 3.1
from my
1.4 production machines.
starting with 3.0, we introduced config define directives that allow to
enable/disable easier features such as authentication. Practically,
with
default config you have to add #!define WITH_MYSQL and #!define
WITH_AUTH
For a step-by-step installation from GIT stable branch, see:
http://www.kamailio.org/dokuwiki/doku.php/install:kamailio-3.1.x-from-git
Cheers,
Daniel
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
Kamailio (OpenSER) Advanced Training
Jan 24-26, 2011, Irvine, CA, USA
http://www.asipto.com
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
