On 11/06/2010 08:26 PM, Sébastien Cramatte wrote:
Hello,
I'm new in kamailio/sr.
I've installed 3.1 packages on my debian squeeze.
I would like to configure LCR and CARRIERROUTE modules but I don't find
suficient doc
to do it properly.
Does someone can give me resources where I can found :
- required modparam for LCR and CARRIERROUTE
- SQL examples datas for both modules
- example of route logic using both modules
Thank you
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello,
First of all you need to clearly define what you need to accomplish. I
suspect you need some sort of load balancing. For that you can use
either carrierroute or lcr. For carrierroute you can have blacklist
capabilities as well. Please read the README or the info on this page
http://www.kamailio.org/docs/modules/3.1.x/modules/carrierroute.html
You can configure Carrierroute either in text file mode or in DB mode.
You will have there a snippet with some cfg code that describes
balancing based on callid, also some DB setups for the table.
modparam("carrierroute", "config_source", "db")
modparam("carrierroute", "db_url", "dbdriver://username:passw...@dbhost/dbname")
are mandatory for basic configuration. The other params are pretty safe
as default. Of course the trick of using carrierroute is how you
populate the tables in the DB, but you will have enough example in the
web page I referred above. Please get back with a more specific question
after you try using the module.
Cheers
Marius
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
