On 11/02/2010 09:35 AM, Sergey Okhapkin wrote:
htable module should do the trick to you.
On Tuesday 02 November 2010, Bernhard Suttner wrote:
Hi,
I want something like that:
# define some router to use later in the script (global section)
Mod_param(router(1), "10.10.10.1")
mod_param(router(2), "10.10.10.2")
mod_param(router(3), "10.10.10.3")
Mod_param(router_count, "3")
within the different routes I want to loop through the routers like that:
$var(i)
while($(var(i)< $var(router_count)) {
if ($var(router($var(i)) == src_ip") {
.. do something
}
}
Another option is to push the constants into AVP arrays at startup (I
assume there is some sort of init route at this point, otherwise a
module init event-route):
$(avp(s:routers)[0]) = "10.10.10.1";
$(avp(s:routers)[1]) = "10.10.10.2";
$(avp(s:routers)[2]) = "10.10.10.3";
You can then iterate through them, using is_avp_set() to check if
something exists at the current index/array subscript:
$var(i) = 0;
while(is_avp_set("$(avp(s:routers)[$var(i)])")) {
xlog("L_INFO", "Router is: $(avp(s:routers)[$var(i)])\n";
$var(i) = $var(i) + 1;
}
--
Alex Balashov - Principal
Evariste Systems LLC
1170 Peachtree Street
12th Floor, Suite 1200
Atlanta, GA 30309
Tel: +1-678-954-0670
Fax: +1-404-961-1892
Web: http://www.evaristesys.com/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
