Hello,
I think I tried everything to get asterisk let registration be allowed. I
set insecure=port,invite on the main trunk from kamailio, for every friend
(every user) which register is forwarded..Asterisk keeps sending  401
Unauthorized. Is there any trick about it?

On Wed, Oct 13, 2010 at 1:59 PM, Daniel-Constantin Mierla <mico...@gmail.com
> wrote:

>  in Asterisk you have to accept SIP traffic coming from kamailio without
> authentication (e.g., based on source ip/port).
>
> Cheers,
> Daniel
>
>
> On 10/13/10 1:38 PM, Borin wrote:
>
> Is kamailio supposed to send WWW-Authenticate header back to asterisk after
> it gets SIP/2.0 401 Unauthorized?
> kamailio authenticates user , sends REGISTER to asterisk, after getting
> "Unauthorized" sends another REGISTER with the same headers and, as the
> second REGISTER does not contain
> WWW-Authenticate: Digest algorithm=MD5, realm="blabla", nonce="56c213f9",
> Asterisk does not register this user.
>
> On Wed, Oct 13, 2010 at 11:25 AM, Borin <katerin.bo...@gmail.com> wrote:
>
>> Thanks a lot for a link. before was:
>> listen=udp:IP:port
>> I changed it to
>> listen=udp:IP
>> port=5070
>>
>> Now works
>>
>>
>>
>> On Wed, Oct 13, 2010 at 10:50 AM, Daniel-Constantin Mierla <
>> mico...@gmail.com> wrote:
>>
>>>  Hello,
>>>
>>> what is the configuration line before (not the comments)?
>>>
>>> If it is alias or listen, then there is a conflict in the grammar, not
>>> very trivial to fix:
>>>
>>> http://sip-router.org/tracker/index.php?do=details&task_id=56&project=1&pagenum=2
>>>
>>> Cheers,
>>> Daniel
>>>
>>>
>>> On 10/13/10 10:44 AM, Borin wrote:
>>>
>>> hello again
>>> sorry for stupid question, but I can't get this definition working. I
>>> have ver 3.1 of kamailio, the definitions don't work as it described in the
>>> manual.
>>>
>>> asterisk.bindip = "asterisk.ip" desc "Asterisk IP Address"
>>> asterisk.bindport = "5080" desc "Asterisk Port"
>>> kamailio.bindip = "kamailio.ip" desc "Kamailio IP Address"
>>> kamailio.bindport = "5060" desc "Kamailio Port"
>>> kamailio (ver 3.1 ) sais after restart I have syntax error
>>> Oct 13 08:40:13 voip-test kamailio: : <core> [cfg.y:3412]: yyerror_at(): 
>>> parse error in config file 
>>> /usr/local/kamailio-3.1/etc/kamailio-pbx/kamailio.cfg, line 43, column 17: 
>>> syntax error
>>>
>>> Oct 13 08:40:13 voip-test kamailio: : <core> [cfg.y:3412]: yyerror_at(): 
>>> parse error in config file 
>>> /usr/local/kamailio-3.1/etc/kamailio-pbx/kamailio.cfg, line 43, column 17: 
>>> unknown config variable
>>> Oct 13 08:40:13 voip-test kamailio: : <core> [cfg.y:3409]: yyerror_at(): 
>>> parse error in config file 
>>> /usr/local/kamailio-3.1/etc/kamailio-pbx/kamailio.cfg, line 43, column 
>>> 19-33:
>>>
>>>
>>>
>>>
>>> On Wed, Oct 13, 2010 at 8:59 AM, Borin <katerin.bo...@gmail.com> wrote:
>>>
>>>> Thanks, Lucas. That is exactly what I was looking for
>>>>
>>>>
>>>> On Tue, Oct 12, 2010 at 5:47 PM, Lucas Alvarez <luca...@gmail.com>wrote:
>>>>
>>>>> Hello, here is How-To written by Daniel-Constantin Mierla of a
>>>>> Kamailio-Asterisk integration:
>>>>> http://kb.asipto.com/asterisk:realtime:kamailio-3.0.x-asterisk-1.6.2-astdb,
>>>>> check the .cfg file posted there. Actually I followed up that tutorial 
>>>>> and I
>>>>> have the extensions registered both on Asterisk and Kamailio. I hope this
>>>>> can be useful.
>>>>> Regards.
>>>>>
>>>>>
>>>>>  Lucas
>>>>>
>>>>>  On Tue, Oct 12, 2010 at 1:34 PM, Borin <katerin.bo...@gmail.com>wrote:
>>>>>
>>>>>>  Hello,
>>>>>> I am not good at kamailio. Could anyone tell me how can I forward
>>>>>> register messages coming to kamailio to asterisk? I need users to be
>>>>>> registered on kamailio and on asterisk at one time.
>>>>>> I do in kamailio.cfg:
>>>>>> if (is_method("REGISTER"))
>>>>>>       {
>>>>>>                 save("location");
>>>>>>                 route(FWD_REG);
>>>>>>                 exit;
>>>>>>
>>>>>>         }
>>>>>> route[FWD_REG] {
>>>>>>        rewritehost("Asterisk_IP:5060");
>>>>>>        if(!t_relay())
>>>>>>                sl_reply_error();
>>>>>>
>>>>>>        exit;
>>>>>> }
>>>>>>
>>>>>> But it (kamailio ver 3.1) does not forward them.
>>>>>>
>>>>>>
>>>>>>  _______________________________________________
>>>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
>>>>>> list
>>>>>> sr-users@lists.sip-router.org
>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>> _______________________________________________
>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing 
>>> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>
>>>   --
>>> Daniel-Constantin Mierlahttp://www.asipto.com
>>>
>>>
>>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing 
> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
> --
> Daniel-Constantin Mierlahttp://www.asipto.com
>
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Reply via email to