On 10/06/2010 06:41 PM, Stagg Shelton wrote:
I'm working on a setup where we have rtpproxy on a machine with eth0
IP 10.10.5.141/19 and eth1 IP 10.10.10.78/24. When using
force_rtp_proxy("","10.10.5.141"); the connection information (c)
field in the SDP is not being set to the ip 10.10.5.141 It is instead
being set to 10.10.10.78
We are starting to run out of ideas on getting the proper contact
address into the sdp based on call source signaling ip. Does anyone
have any ideas what the problem could be?
Are you invoking rtpproxy in bridging mode?
If so, try one of:
force_rtp_proxy("ocfaie");
or the opposite direction:
force_rtp_proxy("ocfaei");
--
Alex Balashov - Principal
Evariste Systems LLC
1170 Peachtree Street
12th Floor, Suite 1200
Atlanta, GA 30309
Tel: +1-678-954-0670
Fax: +1-404-961-1892
Web: http://www.evaristesys.com/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
