On Sep 30, 2010 at 19:07, Simone Felici <s.fel...@mclink.eu> wrote:
>
> Thank you a lot for your answer!
> I'll try these modifications, starting from some tune on actual
> config of ser-2.0 to bring all working correctly and then ending
> with a test phase of the ser-3.0 version.
> I'll let you know if I should have some new issues.
I've just remember one more thing: try using consume_credentials()
when proxy_authorize() (or radius_proxy_authorize) is successful.
This will remove the auth. info from the packets (most likely if you
forward them and the packets don't loop back through your proxy it is
not needed anymore).
Speaking of radius_proxy_authorize(), you have a small script bug:
> if (!radius_proxy_authorize("$domain_default")) {
>
> xlog("L_INFO","LXLOG AUTHENTICATION: !proxy_authenticate");
> if ($? == -2) {
...
$? is the return code of the last function, and in this case since you
inserted that xlog() statement, $? will contain xlog() return value
and not the one from radius_proxy_authorize().
You can further reduce the size by commenting out all the setavpflag(),
but note that this will break rtpproxy/nat traversal (but you can do it
the old style way, like in ser 0.9.9, without saving avps in RR).
Apart from that look at forwarded sip packets and see if you can spot
useless headers. If you do you can always remove them, by using
remove_hf(header_name).
If you try migrating to 3.0, check sip-router-oob.cfg or ser-oob.cfg
(the name depends on how you install it). I think your config is based
on the 2.0 version of it.
Andrei
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
