Andrei Pelinescu-Onciul writes: > > enable_tls=1 > > tcp_async=no # do not include in 3.1 > > listen=udp:0.0.0.0:5060 > > listen=tcp:0.0.0.0:5060 > ^^^^^^^^ it should not be 0.0.0.0 but an actual IP. > If you use 0.0.0.0 you _must_ set adevertised_adress or > you will have some strange Vias && RRs. > > > listen=tls:0.0.0.0:5061 # not needed in 3.1 > ^^^^^^^^^^^^^^^^ - it's optional only if you have another > listen which does not specify the protocol > (e.g. listen=10.0.0.2:5060 or > listen=10.0.0.2). In this case ser will > listen on all protocols on the default > port). I > This is true also for 3.0 and at least for > all ser versions.
ok, fixed. > In general I use > http://sip-router.org/docbook/sip-router/branch/master/modules/tls/tls.html#tls.certs_howto > as a quick setup reminder. i read that too, but it was not as easy to follow as the tuto. -- juha _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
