Dear Daniel, Now the new issue. Seems now openser is trying to talk with radius server. But still I am getting the one error in syslog which is as follows.
rc_send_server: no reply from RADIUS server 128-185-38-162.totisp.net:1812 Actually I have written only 128.185.38.162 in auth_server in radiusclient.conf. I don't know how this totisp.net is added. I haven't mentioned it anywhere. Please help me. Thanks. Regards, Pratik On Mon, Aug 2, 2010 at 11:44 AM, Pratik Shrestha <pratik...@gmail.com>wrote: > Dear Daniel, > > Before I work for the new version, I am first trying to configure old > version of openser and radius. I am using openser version 1.0.1 and radius > client version 0.5.1 and I am following the tutorial given in > http://kamailio.net/docs/openser-radius-1.0.x.html. > > My freeradius server is in another machine and when I use radclient to > check the user I made, I get the "Authenticated" message. > But when I use X-lite and connect to openser, it seems openser is not > talking with freeradius servers. I am sure the "secret" I am using is right > as I have already tested from radclient. The log which I am getting in > openser is as shown below > > 9(1986) SIP Request: > 9(1986) method: <REGISTER> > 9(1986) uri: <sip:192.168.0.56> > 9(1986) version: <SIP/2.0> > 9(1986) parse_headers: flags=2 > 9(1986) Found param type 232, <branch> = > <z9hG4bK-d8754z-c33212005635f16c-1---d8754z->; state=6 > 9(1986) Found param type 235, <rport> = <n/a>; state=17 > 9(1986) end of header reached, state=5 > 9(1986) parse_headers: Via found, flags=2 > 9(1986) parse_headers: this is the first via > 9(1986) After parse_msg... > 9(1986) preparing to run routing scripts... > 9(1986) parse_headers: flags=100 > 9(1986) DEBUG:maxfwd:is_maxfwd_present: value = 70 > 9(1986) parse_headers: flags=10 > 9(1986) DEBUG:parse_to:end of header reached, state=9 > 9(1986) DEBUG: get_hdr_field: <To> [44]; uri=[sip:101%40kamailio.org@ > 192.168.0.56] > 9(1986) DEBUG: to body ["101"<sip:101%40kamailio....@192.168.0.56> > ] > 9(1986) DEBUG: add_param: tag=cc6e4259 > 9(1986) DEBUG:parse_to:end of header reached, state=29 > 9(1986) radius_is_user_in(): Failure > 9(1986) parse_headers: flags=200 > 9(1986) get_hdr_field: cseq <CSeq>: <2> <REGISTER> > 9(1986) DEBUG: get_hdr_body : content_length=0 > 9(1986) found end of header > 9(1986) find_first_route: No Route headers found > 9(1986) loose_route: There is no Route HF > 9(1986) grep_sock_info - checking if host==us: 12==9 && [192.168.0.56] == > [127.0.0.1] > 9(1986) grep_sock_info - checking if port 5060 matches port 5060 > 9(1986) grep_sock_info - checking if host==us: 12==12 && [192.168.0.56] > == [192.168.0.56] > 9(1986) grep_sock_info - checking if port 5060 matches port 5060 > 9(1986) grep_sock_info - checking if host==us: 12==9 && [192.168.0.56] == > [127.0.0.1] > 9(1986) grep_sock_info - checking if port 5060 matches port 5060 > 9(1986) grep_sock_info - checking if host==us: 12==12 && [192.168.0.56] > == [192.168.0.56] > 9(1986) grep_sock_info - checking if port 5060 matches port 5060 > 9(1986) check_nonce(): comparing > [4c5649b2d78b205e6a5ca1c6dcdc54b84445dd9c] and > [4c5649b2d78b205e6a5ca1c6dcdc54b84445dd9c] > 9(1986) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed > 9(1986) build_auth_hf(): 'WWW-Authenticate: Digest realm="192.168.0.56", > nonce="4c5649b2d78b205e6a5ca1c6dcdc54b84445dd9c" > ' > 9(1986) parse_headers: flags=ffffffffffffffff > 9(1986) check_via_address(192.168.0.148, 192.168.182.3, 0) > 9(1986) DEBUG:destroy_avp_list: destroying list (nil) > 9(1986) receive_msg: cleaning up > > At freeradius also, no request goes from openser. > > Please advise me how to get rid of this problem. > > Best Regards, > Pratik > > > On Wed, Jul 28, 2010 at 5:56 PM, Pratik Shrestha <pratik...@gmail.com>wrote: > >> Thanks a lot. I will give it a try >> >> Pratik >> >> >> On Wed, Jul 28, 2010 at 3:48 PM, Daniel-Constantin Mierla < >> mico...@gmail.com> wrote: >> >>> Hello, >>> >>> >>> On 7/22/10 6:06 AM, Pratik Shrestha wrote: >>> >>>> Dear All, >>>> >>>> I am very new to OpenSer. I want to use latest version of OpenSer with >>>> Radius. I need the documentation/tutorial on how to do this. Googling, >>>> Ionly >>>> found for the old version. Please help me. >>>> >>> >>> indeed, there is a rather old version: >>> >>> http://www.kamailio.org/docs/openser-radius-1.0.x.html >>> >>> What I can say now is that you can skip the part of installing kamailio >>> and use next link instead: >>> http://www.kamailio.org/dokuwiki/doku.php/install:kamailio-3.0.x-from-git >>> >>> Radius client library is now in most of common Linux distributions, so >>> you can install it with the package manager (you need the devel headers as >>> well, the -dev package). >>> >>> FreeRadius configuration should be more or less the same. >>> >>> The config of kamailio has changed quite a lot. Use the default one from >>> kamailio, follow the WITH_AUTH define conditions and replace auth_db with >>> auth_radius modules and functions. Also, the rest of radius modules were >>> merged into misc_radius. For enabling radius acc, you need to recompile acc >>> module after editing the Makefile in module directory. >>> >>> Hope it helps to start, ask here if you get stuck. >>> >>> >>> Cheers, >>> Daniel >>> >>> -- >>> Daniel-Constantin Mierla >>> http://www.asipto.com/ >>> >>> >> >
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
