This is exactly what I am doing.
I have this Asterisk/Kamailio as a host on an ESX server.
The host has 2 interfaces, eth0 and eth1, see bellow, the interface config:
r...@qa-qsuitepbx-01:~# more /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address 10.98.6.5
netmask 255.255.254.0
network 10.98.6.0
broadcast 10.98.7.255
gateway 10.98.6.1
# The secondary network interface
auto eth1
iface eth1 inet static
address 10.98.6.6
netmask 255.255.254.0
network 10.98.6.0
broadcast 10.98.7.255
gateway 10.98.6.1
up route add -net 10.98.118.0 netmask 255.255.255.0 gw 10.98.6.1 dev eth1
I do not see the invites going from 6.5 to 6.6 then 118.20
So trying to dummy this down to 1 interface and use different ports.
But my problem is I don't know what and where to setup aech app (asterisk and
Kamailio) to be on separate ports, and make sure the route in Kamailio is
correct.
Nelson Pereira
-----Original Message-----
From: Omar [mailto:o...@321communications.com]
Sent: Thursday, May 20, 2010 9:25 AM
To: Nelson Pereira
Cc: Klaus Darilion; sr-users@lists.sip-router.org
Subject: Re: [SR-Users] Need help in routing configuration
many options
here are some:
use different ports 5061 to asterisk and the rest to Kamailio, or
virtualize, there are many solutions for virtualization, including
VMWARE, VirtualBox(Oracle-SUN), and Xen.
or:
use different Interfaces real or virtual with different IPs, and
listed on the specific interface for each application.
kamailio eth0 (ip x.x.x.x)
asterisk eth0:1 (ip z.z.z.z)
_______________
Omar
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
