2010/5/12 Maciej Bylica <mb...@gazeta.pl>: > 2010/5/12 Iñaki Baz Castillo <i...@aliax.net>: >> 2010/5/12 Maciej Bylica <mb...@gazeta.pl>: >>> Hi ALL, >>> >>> I have a problem to configure LCR module to work properly (kamailio rel. >>> 1.5) >>> The task in my case is to handle: >>> 1) All calls coming with CLD number prefix 482223344 from my MGW >>> (77.77.77.77) towards kamilio and direct them to sip world >>> (88.88.88.88) >>> 2) Calls with CLD starting with 48 coming from SIP world towards >>> kamailio and direct them to my MGWs. Additionaly i need to route it on >>> the basis of CLI number. >>> So MGWs <---> Kamailio <---> SIPProxies (88.88.88.88) >>> >>> In db: >>> +----+-----------+----------------+--------+----------+ >>> | id | prefix | from_uri | grp_id | priority | >>> +----+-----------+----------------+--------+----------+ >>> | 1 | 48 | 48 | 1 | 1 | >>> | 2 | 48 | 49 | 2 | 1 | >>> | 3 | 482223344 | 77.77.77.77 | 3 | 1 | >>> +----+-----------+----------------+--------+----------+ >> >>> Unfortunately: >>> - call is originated on 77.77.77.77 with CLD 48222334455 number and >>> kamailio forward this call to grp_id=3 SIPWORLD which is okay. The >>> problem is that if the call fail, kamailio will try to use 77.77.77.70 >>> and 77.77.77.71 from grp_id=1 which is wrong. I have no idea how to >>> provide a kind of huntstop in grp_id=3. >> >> Why do you set "77.77.77.77" in the from_uri field of the third entry >> in 'lcr' table? It makes no sense. As you don't pass a pseudovariable >> to the command load_gw() then LCR tries to match the *From URI* of the >> INVITE with the 'from_uri' of the 'lcr' table. >> >> >> -- >> Iñaki Baz Castillo >> <i...@aliax.net> >> > Hi, > > Thx for prompt answer. > I was playing around with lcr table and found that i may place an IP > address which is a part of sip uri there. > It means that if a call is originated from 77.77.77.77 (from sip uri > 482223...@77.77.77.77) then grp_id=3 should be chosen. > Of course i may wipe this out but i am unsure if it help.
Still the call matches id=3 and just after failure id=1. Thx, Maciej. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
