Oh.... Guys ! you are wizards..... Works like I wanted.. One more may be last thing: - I found the strange behavior - if I make changes at my ext ACL script (its python ) and then "squid -k reconfigure" then I can see that my script appears in the "TOP" of process and loads CPU to 100%, if to restart the squid at whole "systemctl restart squid" - all OK again. If you could to check this at your end - will be great !
Thanks again! Alexg вс, 23 апр. 2023 г. в 16:36, Amos Jeffries <squ...@treenet.co.nz>: > On 23/04/2023 5:27 pm, Alexeyяр Gruzdov wrote: > > Hello Guys! > > Thank you very much! For now all works like I needed! > > > > But I have an one more questions about how I could to use the kv-pair: > ... > > and then ACL with “note proxy all “ > > But how the kv-pair must to be looked for this my tag ? > > > > I have tried to get answer from my ext script like > > “OK” > > “proxy=all” > > > > But looks like it’s not correct > > > > This part of the instructions were missed: > https://wiki.squid-cache.org/Features/AddonHelpers#helper-protocols > " > For every line sent by Squid exactly one line is expected back. Some > script language such as perl and python need to be careful about the > number of newlines in their output. > " > > If your helper received something like this (with concurrency channel-id > "1"): > > "1 bob 192.0.2.1" > > It should produce a line like: > "1 OK proxy=all" > > If no concurrency channel-id is received, then output is the same but > without sending channel-id back and MUST be sent in same order as received. > > I do recommend using concurrency. It can help further debug issues with > helpers responding incorrectly. > > HTH > Amos > > _______________________________________________ > squid-users mailing list > squid-users@lists.squid-cache.org > http://lists.squid-cache.org/listinfo/squid-users >
_______________________________________________ squid-users mailing list squid-users@lists.squid-cache.org http://lists.squid-cache.org/listinfo/squid-users
