I have two network interfaces on my machine. I'm trying to setup incoming
through the enp1s0's IP address and if the connection comes from port 11000
then I want squid to use wlx74da388c32c7's IP address.
IPs on my machine
root@poweredge:/var/log/squid# ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default qlen 1000
link/ether 00:1e:4f:cd:c1:5f brd ff:ff:ff:ff:ff:ff
inet 192.168.1.212/24 brd 192.168.1.255 scope global enp1s0
valid_lft forever preferred_lft forever
inet6 fe80::21e:4fff:fecd:c15f/64 scope link
valid_lft forever preferred_lft forever
3: wlx74da388c32c7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state
UP group default qlen 1000
link/ether 74:da:38:8c:32:c7 brd ff:ff:ff:ff:ff:ff
inet 172.16.11.107/24 brd 172.16.11.255 scope global dynamic noprefixroute
wlx74da388c32c7
valid_lft 3531sec preferred_lft 3531sec
inet6 fe80::4e86:c190:1e45:4722/64 scope link noprefixroute
valid_lft forever preferred_lft forever
I want to connect to Squid proxy using the 192.168.1.212 and if I am connecting
using port 11000, I want squid to have the traffic go out of the 172.16.11.107
IP
Below is the relevant part of my squid.conf
http_port 11000 name=port_11000
acl port_11000_acl myportname port_11000
tcp_outgoing_address 172.16.11.107 port_11000_acl
>From what I have read the above configuration should be enough for Squid, but
>on Linux machines, I also need to use iptables. I have never used IP tables.
What would I need to do with iptables to make this work?
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
http://lists.squid-cache.org/listinfo/squid-users
