is this squid limitation ? or
kernel limitation ? > On Jan 11, 2018, at 12:07 PM, Amos Jeffries <squ...@treenet.co.nz> wrote: > > On 11/01/18 21:50, --Ahmad-- wrote: >> must the ip be attached on os interface so that squid use it as outgoing >> address ? >> can squid use outgoing address that not being attached to the interface ? > > No it cannot. > > But that is also why the config I suggested works where the one you attempted > does not. > > The ACL is what determines whether Squid attempts to bind an IP and it will > never match *until* there is inbound traffic actually arriving with that > local-IP. > > So you configure Squid up-front with the IPs you are going to maybe assign. > Then after Squid is running you assign and de-assign as necessary from that > set, no need to reconfigure Squid constantly. > > > >> i tried to outgoing address that not attached but squid gave an error : >> 2018/01/11 04:42:36 kid1| commBind: Cannot bind socket FD 11622 to >> [2abc:5ad1:1bc6:bc09:d18a:5fb4:239a:6277]: (99) Cannot assign requested >> address >> whats your thoughts ? > > I think the above is not IPv4. So your IPv4 specific settings are not > relevant. > > Amos > _______________________________________________ > squid-users mailing list > squid-users@lists.squid-cache.org > http://lists.squid-cache.org/listinfo/squid-users _______________________________________________ squid-users mailing list squid-users@lists.squid-cache.org http://lists.squid-cache.org/listinfo/squid-users
