This problem, in principle, is common to all versions of ssl-bumped Squid from version 3.4 and 5.0, inclusive, and occurs when the stored certificate is damaged for any reason. The only thing vorkeraund that I could find - a monitor kesh.log and initialize the certificate database again with squid restart automatically.
In some installations, this problem does not occur over the years. In other - almost daily. I have no desire to find out why this is happening exactly. For me it was easier to make the watchdog, which will follow up on this. 03.03.2017 3:40, Yuri Voinov пишет: > > One hint finally: > > '([^ ]*) helper database ([^ ]*) failed: The SSL certificate database > ([^ ]*) is corrupted. Please rebuild' - - - 0 exec > "/usr/local/bin/crtd_create.sh -r >/dev/null 2>&1" > 'FATAL: ([^ ]*) helpers are crashing too rapidly, need help!' - - - > 0 exec "/usr/local/bin/crtd_create.sh -r >/dev/null 2>&1" > 'Cannot add certificate to db.' - - - 0 exec > "/usr/local/bin/crtd_create.sh -r >/dev/null 2>&1" > > PS. This is from logsurfer.conf. > > > 03.03.2017 3:34, Yuri Voinov пишет: >> >> This error is usually preceded by another error in cache.log >> associated with the certificates. >> >> I will show you the direction. Then go himself. >> >> This software will useful for you to solve: >> >> http://www.crypt.gen.nz/logsurfer/ >> >> HTH, Yuri >> >> >> 03.03.2017 2:47, --Ahmad-- пишет: >>> hey folks . >>> i have a problem with squid it get crashed after i enabled https ! >>> cache log error => FATAL: The ssl_crtd helpers are crashing too >>> rapidly, need help! >>> >>> i googled many topics and relevant pages and couldnt find a >>> clear solution . >>> >>> the quick solution i made was i removed the certs in file : >>> *rm -rfv /var/lib/ssl_db/* >>> * >>> * >>> *then reinitiated the DB using cmd below :* >>> /lib/squid/ssl_crtd -c -s /var/lib/ssl_db >>> chown -R squid.squid /var/lib/ssl_db >>> chown-R squid.squid /var/lib/ssl_db >>> >>> the restarted squid . >>> >>> but this is not a solution becuase squid get crashed again after >>> certain time and i don’t know why ! >>> my version is 3.5.2 >>> >>> here is squid.conf : >>> /etc/squid/squid.conf >>> visible_hostname pcloud >>> acl ip1 myip 10.1.0.1 >>> acl ip2 myip 192.168.10.210 >>> tcp_outgoing_address 192.168.10.210 ip1 >>> tcp_outgoing_address 192.168.10.210 ip2 >>> # >>> # Recommended minimum configuration: >>> # >>> >>> # Example rule allowing access from your local networks. >>> # Adapt to list your (internal) IP networks from where browsing >>> # should be allowed >>> acl localnet src 10.0.0.0/8 # RFC1918 possible internal network >>> acl localnet src 172.16.0.0/12 # RFC1918 possible internal network >>> acl localnet src 192.168.0.0/16 # RFC1918 possible internal network >>> acl localnet src fc00::/7 # RFC 4193 local private network range >>> acl localnet src fe80::/10 # RFC 4291 link-local (directly >>> plugged) machines >>> >>> acl SSL_ports port 443 >>> acl Safe_ports port 80 # http >>> acl Safe_ports port 21 # ftp >>> acl Safe_ports port 443 # https >>> acl Safe_ports port 70 # gopher >>> acl Safe_ports port 210 # wais >>> acl Safe_ports port 1025-65535 # unregistered ports >>> acl Safe_ports port 280 # http-mgmt >>> acl Safe_ports port 488 # gss-http >>> acl Safe_ports port 591 # filemaker >>> acl Safe_ports port 777 # multiling http >>> acl CONNECT method CONNECT >>> >>> # >>> # Recommended minimum Access Permission configuration: >>> # >>> # Deny requests to certain unsafe ports >>> http_access deny !Safe_ports >>> >>> # Deny CONNECT to other than secure SSL ports >>> http_access deny CONNECT !SSL_ports >>> http_access allow CONNECT >>> # Only allow cachemgr access from localhost >>> http_access allow localhost manager >>> http_access deny manager >>> >>> # We strongly recommend the following be uncommented to protect innocent >>> # web applications running on the proxy server who think the only >>> # one who can access services on "localhost" is a local user >>> #http_access deny to_localhost >>> >>> # >>> # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS >>> # >>> >>> # Example rule allowing access from your local networks. >>> # Adapt localnet in the ACL section to list your (internal) IP networks >>> # from where browsing should be allowed >>> http_access allow localnet >>> http_access allow localhost >>> >>> # And finally deny all other access to this proxy >>> http_access deny all >>> >>> # Squid normally listens to port 3128 >>> http_port 3128 >>> >>> # Uncomment and adjust the following to add a disk cache directory. >>> #cache_dir ufs /var/cache/squid 100 16 256 >>> >>> # Leave coredumps in the first cache dir >>> #coredump_dir /var/cache/squid >>> >>> # >>> # Add any of your own refresh_pattern entries above these. >>> # >>> # >>> >>> http_port 3126 >>> #http_port 3128 >>> ####################################### >>> #cache_swap_low 90 >>> #cache_swap_high 95 >>> ############################ >>> cache_effective_user squid >>> cache_effective_group squid >>> memory_replacement_policy lru >>> cache_replacement_policy heap LFUDA >>> ######################## >>> maximum_object_size 10000 MB >>> #cache_mem 5000 MB >>> maximum_object_size_in_memory 10 MB >>> ######################### >>> logfile_rotate 2 >>> max_filedescriptors 131072 >>> ############################### >>> ############ >>> cache_dir aufs /var/cache/squid 600000 64 128 >>> ####################################### >>> https_port 3129 intercept ssl-bump generate-host-certificates=on >>> dynamic_cert_mem_cache_size=4MB >>> cert=/usr/local/squid/ssl_cert/myca.pem >>> key=/usr/local/squid/ssl_cert/myca.pem >>> ssl_bump server-first all >>> sslcrtd_program /lib/squid/ssl_crtd -s /var/lib/ssl_db -M 4MB >>> sslcrtd_children 1000 startup=1 idle=1 >>> ### >>> minimum_object_size 0 bytes >>> #refresh patterns for caching static files >>> refresh_pattern ^ftp: 1440 20% 10080 >>> refresh_pattern ^gopher: 1440 0% 1440 >>> refresh_pattern -i .(gif|png|jpg|jpeg|ico)$ 10080 90% 43200 >>> override-expire ignore-no-cache ignore-no-store ignore-private >>> refresh_pattern -i .(iso|avi|wav|mp3|mp4|mpeg|swf|flv|x-flv)$ 43200 >>> 90% 432000 override-expire ignore-no-cache ignore-no-store >>> ignore-private >>> refresh_pattern -i >>> .(deb|rpm|exe|zip|tar|tgz|ram|rar|bin|ppt|doc|tiff)$ 10080 90% 43200 >>> override-expire ignore-no-cache ignore-no-store ignore-private >>> refresh_pattern -i .index.(html|htm)$ 0 40% 10080 >>> refresh_pattern -i .(html|htm|css|js)$ 1440 40% 40320 >>> refresh_pattern . 0 40% 40320 >>> >>> >>> >>> >>> >>> >>> >>> >>> any Joy Guys ? >>> >>> should i update squid ? or downgrade squid ? >>> >>> kind regards >>> >>> >>> >>> _______________________________________________ >>> squid-users mailing list >>> squid-users@lists.squid-cache.org >>> http://lists.squid-cache.org/listinfo/squid-users >> >> -- >> Bugs to the Future > > -- > Bugs to the Future -- Bugs to the Future
0x613DEC46.asc
Description: application/pgp-keys
signature.asc
Description: OpenPGP digital signature
_______________________________________________ squid-users mailing list squid-users@lists.squid-cache.org http://lists.squid-cache.org/listinfo/squid-users
