Hi,
I try to configure squid by using AD authentication via Kerberos.
And I have a keytab by using msktutil (PROXY.keytab)
I can run kinit, klist, wbinfo (-g, -u, -t) commands without any error.
here is my authparam configuration:
########################################################
### negotiate kerberos and ntlm authentication
#auth_param negotiate program
/usr/local/squid/libexec/negotiate_wrapper_auth --ntlm
/usr/bin/ntlm_auth --diagnostics --helper-protocol=squid-2.5-ntlmssp
--domain=DOMAIN --kerberos /usr/local/squid/libexec/$
auth_param negotiate program
/usr/local/squid/libexec/negotiate_kerberos_auth -d -s GSS_C_NO_NAME
auth_param negotiate children 250
auth_param negotiate keep_alive off
### pure ntlm authentication
auth_param ntlm program /usr/bin/ntlm_auth
--helper-protocol=squid-2.5-ntlmssp
auth_param ntlm children 100
auth_param ntlm keep_alive on
### provide basic authentication via ldap for clients not authenticated
via kerberos/ntlm
auth_param basic program /usr/local/squid/libexec/basic_ldap_auth -R -b
"dc=domain,dc=grp" -D otpch...@domain.grp -W
/usr/local/squid/etc/ldappass.txt -f sAMAccountName=%s -h ldapsrv
auth_param basic children 100
auth_param basic realm Internet Proxy
auth_param basic credentialsttl 1 minute
### ldap authorisation
#external_acl_type nt_group %LOGIN
/usr/local/squid/libexec/ext_ldap_group_acl -d -R -K -b
"dc=domain,dc=grp" -D otpch...@domain.grp -W
/usr/local/squid/etc/ldappass.txt -f "(&(objectclass=person)(sAMAccount$
external_acl_type nt_group ttl=1800 negative_ttl=900 children-max=150
children-startup=10 %LOGIN /usr/local/squid/libexec/ext_ldap_group_acl
-R -K -b "dc=domain,dc=grp" -D otpch...@domain.grp -W /usr/local/s$
#external_acl_type nt_group %LOGIN
/usr/local/squid/libexec/ext_wbinfo_group_acl -d
authenticate_cache_garbage_interval 10 seconds
# Credentials past their TTL are removed rom memory
authenticate_ttl 0 seconds
########################################################
And here is PROXY.keytab content:
########################################################
4 SQUIDPNBDC1$@DOMAIN.GRP
4 SQUIDPNBDC1$@DOMAIN.GRP
4 SQUIDPNBDC1$@DOMAIN.GRP
4 HTTP/squiddc1.domain....@domain.grp
4 HTTP/squiddc1.domain....@domain.grp
4 HTTP/squiddc1.domain....@domain.grp
7 HTTP/proxy.domain....@domain.grp
7 HTTP/proxy.domain....@domain.grp
7 HTTP/proxy.domain....@domain.grp
8 host/squiddc1.domain....@domain.grp
8 host/squiddc1.domain....@domain.grp
8 host/squiddc1.domain....@domain.grp
#######################################################
Here is the problem,
When I set my browser proxy configuration as "squiddc1.DOMAIN.grp " and
then start to browse, I cant see "usern...@domain.grp" log entry in
access.log.
I think, It means that kerberos not work.
Have you any idea about that?
regards
Bu elektronik postada bulunan tum fikir ve gorusler ve ekindeki dosyalar sadece
adres sahip/sahiplerine ait olup, Yasar Toplulugu Sirketleri bu mesajin icerigi
ile ilgili olarak hic bir hukuksal sorumlulugu kabul etmez. Eger gonderilmesi
dusunulen kisi veya kurulus degilseniz, lutfen gonderen kisiyi derhal haberdar
ediniz ve mesaji sisteminizden siliniz.
The information contained in this e-mail and any files transmitted with it are
intended solely for the use of the individual or entity to whom they are
addressed and Yasar Group Companies do not accept legal responsibility for the
contents. If you are not the intended recipient, please immediately notify the
sender and delete it from your system.
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
http://lists.squid-cache.org/listinfo/squid-users
