Hey Robert,
If you have an access_denied then something should show up in the
access.log.
It is pretty hard to tell from what it comes if the settings are unknown.
If you have about 900 users and it's static then using using conf files
is fine.
But it it's a dynamic application, you should consider to use an
external_acl helper which will test the src IP against some key\value DB.
It will remove the complexity of squid configuration and will allow you
a more flexible solution.
Usually the way to solve this kind of issue is to use squid debug
capabilities:
http://wiki.squid-cache.org/KnowledgeBase/DebugSections
Section 28 should shed some light on the issue.
Eliezer
On 07/10/2015 14:20, Robert Conlustro wrote:
I have been using squid 3.4 for about 1 year now and everything was going fine
up until a couple days ago when users started seeing access denied errors for
some reason. I currently have around 900 active users all with their own src
authentication IPs. I use a seperate folder for the users files and include
them into the squid.conf file. Is there a maximum number of src IPs or include
files inside the squid.conf? Maybe I have reached a limit somehwere. In the
past I’ve had a hiccup here and there and always found the error or problem
plain as could be in the cache.log but this time I cannot find the error. I’m
stumped and turning to the community for the first time. Any help or
recommendations would be greatly apreciated.
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
http://lists.squid-cache.org/listinfo/squid-users
