Thanks mike. But I think Amos is right. On 25 July 2015 at 00:27, Mike <mcsn...@afo.net> wrote:
> I see a few issues. > > 1. The report from the log shows a 192.168.*.* address, common LAN IP > The ip 192.168.122.1 is the ip address of virtual interface (acts as a default gateway for Virtual machines). I did NATing using iptables. > > Then in the squid.conf: > 2. You have wvdial destination as 10.1.*.* addresses, which is a > completely different internal network. > Typically there will be no internal routing or communication from a > 192.168..*.* address to/from a 10.*.*.* address without a custom routing > server with 2 network connections, one from each IP set and to act as the > DNS intermediary for routing. Otherwise for network/internet connections, > the computer/browser sees its own IP as local network, and everything else > including 10.*.*.* as an external address out on the internet. I would > suggest getting both the browsing computer and the server on the same IP > subset, as in 192.168.122.x or 10.1.4.x, otherwise these issues are likely > to continue. > I have two squid servers. 1. squid 3.1 on physical server 2. squid 3.3 on VM hosted by 1 Same logs. No different results. So when the client requests 8080 . 3.1 serves. When the client requests 3128 3.3 serves. This application behavior is same for both. > > 3. Next in the squid.conf is http_port which should be port number only, > no IP address, especially 0.0.0.0 which can cause conflicts with squid 3.x > versions. Best bet is use just port only, as in: "http_port 3128" or in > your case "http_port 8080", which is the port (with server IP found in > ifconfig) the browser will use to connect through the squid server. > I tried your suggestion. But not worked. Same results :-( > 4. The bypass local network means any IP connection attempt to a local > network IP will not use the proxy. This goes back to the 2 different IP > subsets. One option is to enter a proxy exception as 10.*.*.* (if the > websense server is using 10.x.x.x IP address). > I was thinking, what would websense have deployed. @amos, mike: Can we overwrite wpad of a client using squid server or any means automatically ????? > > Mike > Jagannath Naidu
_______________________________________________ squid-users mailing list squid-users@lists.squid-cache.org http://lists.squid-cache.org/listinfo/squid-users
