I have squid running ok on one machine doing basic forwarding but when I try to add a setting for url redirection it just stops with no errors.
I cloned the machine and owrked on the url redirection and eventually settled on squirm and got it working, when I went back to the original machine to try it again it did the same. When I try to run it maunally on different port etc using a different config file on either machine it does the same. Below is the log output squid -f squid.conf-2 -X -N -a 3129 2015/03/20 15:45:22.131| command-line -X overrides: ALL,7 2015/03/20 15:45:22.132| http(s)_port: found Listen on Port: 3129 2015/03/20 15:45:22.132| http(s)_port: found Listen on wildcard address: *:3129 2015/03/20 15:45:22.132| CacheManager::registerAction: registering legacy mem 2015/03/20 15:45:22.132| CacheManager::findAction: looking for action mem 2015/03/20 15:45:22.132| Action not found. 2015/03/20 15:45:22.132| CacheManager::registerAction: registered mem 2015/03/20 15:45:22.132| CacheManager::registerAction: registering legacy squidaio_counts 2015/03/20 15:45:22.132| CacheManager::findAction: looking for action squidaio_counts 2015/03/20 15:45:22.132| Action not found. 2015/03/20 15:45:22.132| CacheManager::registerAction: registered squidaio_counts 2015/03/20 15:45:22.132| CacheManager::registerAction: registering legacy diskd 2015/03/20 15:45:22.132| CacheManager::findAction: looking for action diskd 2015/03/20 15:45:22.132| Action not found. 2015/03/20 15:45:22.132| CacheManager::registerAction: registered diskd 2015/03/20 15:45:22.132| Detected IPv6 hybrid or v4-mapping stack... 2015/03/20 15:45:22.132| IPv6 transport Enabled 2015/03/20 15:45:22.132| aclDestroyACLs: invoked 2015/03/20 15:45:22.132| cbdataFree: 0x7ff55b585af8 2015/03/20 15:45:22.132| cbdataFree: Freeing 0x7ff55b585af8 2015/03/20 15:45:22.132| ACL::Prototype::Registered: invoked for type src 2015/03/20 15:45:22.132| ACL::Prototype::Registered: yes 2015/03/20 15:45:22.132| ACL::FindByName 'all' 2015/03/20 15:45:22.132| ACL::FindByName found no match 2015/03/20 15:45:22.132| aclParseAclLine: Creating ACL 'all' 2015/03/20 15:45:22.132| ACL::Prototype::Factory: cloning an object for type 'src' 2015/03/20 15:45:22.132| aclIpParseIpData: all 2015/03/20 15:45:22.132| aclIpParseIpData: magic 'all' found. 2015/03/20 15:45:22.132| aclParseAclList: looking for ACL name 'all' 2015/03/20 15:45:22.133| ACL::FindByName 'all' 2015/03/20 15:45:22.133| Processing Configuration File: squid.conf-2 (depth 0) 2015/03/20 15:45:22.134| Processing: 'visible_hostname mailsrv1' 2015/03/20 15:45:22.134| Processing: 'debug_options rotate=3 ALL,2' 2015/03/20 15:45:22.134| Processing: 'cache_effective_user squid' 2015/03/20 15:45:22.134| Processing: 'cache_effective_group squid' 2015/03/20 15:45:22.134| Processing: 'url_rewrite_program /usr/local/squirm/bin/squirm' 2015/03/20 15:45:22.134| Processing: 'redirect_children 5' 2015/03/20 15:45:22.134| Processing: 'dns_nameservers 208.67.222.222 208.67.220.220 192.168.32.1 192.168.32.2 192.168.40.254 192.168.40.5' 2015/03/20 15:45:22.134| Processing: 'http_port 3329' 2015/03/20 15:45:22.134| http(s)_port: found Listen on Port: 3329 2015/03/20 15:45:22.134| http(s)_port: found Listen on wildcard address: *:3329 2015/03/20 15:45:22.134| Processing: 'hierarchy_stoplist cgi-bin ?' 2015/03/20 15:45:22.134| Processing: 'coredump_dir /var/spool/squid' 2015/03/20 15:45:22.134| Processing: 'refresh_pattern ^ftp: 1440 20% 10080' 2015/03/20 15:45:22.134| Processing: 'refresh_pattern ^gopher: 1440 0% 1440' 2015/03/20 15:45:22.134| Processing: 'refresh_pattern -i (/cgi-bin/|\?) 0 0% 0' 2015/03/20 15:45:22.134| Processing: 'refresh_pattern . 0 20% 4320' 2015/03/20 15:45:22.134| Processing: 'delay_initial_bucket_level 0' 2015/03/20 15:45:22.134| aclParseAclList: looking for ACL name 'all' 2015/03/20 15:45:22.134| ACL::FindByName 'all' 2015/03/20 15:45:22.134| aclParseAclList: looking for ACL name 'all' 2015/03/20 15:45:22.134| ACL::FindByName 'all' 2015/03/20 15:45:22.134| aclParseAclList: looking for ACL name 'all' 2015/03/20 15:45:22.134| ACL::FindByName 'all' 2015/03/20 15:45:22.134| aclParseAclList: looking for ACL name 'all' 2015/03/20 15:45:22.134| ACL::FindByName 'all' 2015/03/20 15:45:22.134| aclParseAclList: looking for ACL name 'all' 2015/03/20 15:45:22.134| ACL::FindByName 'all' 2015/03/20 15:45:22.134| aclParseAclList: looking for ACL name 'all' 2015/03/20 15:45:22.134| ACL::FindByName 'all' 2015/03/20 15:45:22.134| Log definition name 'squid' file '/var/log/squid/access.log' 2015/03/20 15:45:22.134| wccp2_add_service_list: added service id 0 2015/03/20 15:45:22.134| aclParseAclList: looking for ACL name 'all' 2015/03/20 15:45:22.134| ACL::FindByName 'all' 2015/03/20 15:45:22.134| aclParseAclList: looking for ACL name 'all' 2015/03/20 15:45:22.134| ACL::FindByName 'all' 2015/03/20 15:45:22.134| tools.cc(671) uniqueHostname: Config: ' 2015/03/20 15:45:22.134| tools.cc(671) uniqueHostname: Config: ' 2015/03/20 15:45:22.134| Initializing https proxy context 2015/03/20 15:45:22.139| Using SSLv2/SSLv3. 2015/03/20 15:45:22.141| Setting RSA key generation callback. 2015/03/20 15:45:22.141| Setting certificate verification callback. 2015/03/20 15:45:22.141| Setting CA certificate locations. 2015/03/20 15:45:22.153| leave_suid: PID 16685 called 2015/03/20 15:45:22.153| leave_suid: PID 16685 giving up root, becoming 'squid' 2015/03/20 15:45:22.153| command-line -X overrides: rotate=3 ALL,2 [root@host2 squid]# and this is the contents on the squid.conf-2 file *more squid.conf-2* # visible_hostname mailsrv1 # Recommended minimum configuration: debug_options rotate=3 ALL,2 cache_effective_user squid cache_effective_group squid url_rewrite_program /usr/local/squirm/bin/squirm redirect_children 5 # add dns server for squid to use specifically dns_nameservers 208.67.222.222 208.67.220.220 192.168.32.1 192.168.32.2 192.168.40.254 192.168.40.5 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost # Deny requests to certain unsafe ports # Deny CONNECT to other than secure SSL ports #http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed # And finally deny all other access to this proxy # Squid normally listens to port 3128 http_port 3329 # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? # Uncomment and adjust the following to add a disk cache directory. # Leave coredumps in the first cache dir coredump_dir /var/spool/squid # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 delay_initial_bucket_level 0 Can anyone tell me what I am doing wrong ? all I am after is a non-caching squid proxy server which will do some url redirection. Thanks Ian
_______________________________________________ squid-users mailing list squid-users@lists.squid-cache.org http://lists.squid-cache.org/listinfo/squid-users
