Hello Team,
We can inhibit X-Forwarded-For with *"header_access X-Forwarded-For deny
all*" in squid configuration (*squid.conf*) file.
#Add below Commands in squid conf:
via off
forwarded_for off
follow_X_forwarded_for deny all
Since need to build squid from source for these limitations to work with
some special flag for './configure'.
eg : |./configure --enable-http-violations --prefix=/usr
--includedir=/usr/include --datadir=/usr/share
--bindir=/usr/sbin--libexecdir=/usr/lib/squid --localstatedir=/var
--sysconfdir=/etc/squid --enable-auth="ntlm,basic"
--enable-follow-x-forwarded-for|
Regards,
ViSolve Squid
On 9/28/2014 3:45 AM, Ahmd wrote:
hi all ,
im trying to make anonymous squid as i can
but no luck
akways been caughted by
http://www.ip-score.com/
???
how do i hide proxy information and let it as its comming from normal
not proxy
is that possible ?
here is squid.conf
[root@ns504835 opt]# cat /etc/squid/squid.conf
###########Authentication######
auth_param basic children 20
auth_param basic realm Linux Class
auth_param basic program /lib/squid/basic_ncsa_auth /etc/squid/squid_user
auth_param basic credentialsttl 2 hours
auth_param basic casesensitive off
###
acl classx proxy_auth REQUIRED
###
dns_nameservers 8.8.8.8
# Recommended minimum configuration:
#
# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
acl localnet src fc00::/7 # RFC 4193 local private network range
acl localnet src fe80::/10 # RFC 4291 link-local (directly
plugged) machines
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports
# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports
# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager
http_access allow classx
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost
# And finally deny all other access to this proxy
http_access deny all
http_port 65000
# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /var/cache/squid 100 16 256
# Leave coredumps in the first cache dir
coredump_dir /var/cache/squid
#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
###############################
cache_effective_user squid
cache_effective_group squid
##############################
visible_hostname proxy
###########################################
forwarded_for off
request_header_access Allow allow all
request_header_access Authorization allow all
request_header_access WWW-Authenticate allow all
request_header_access Proxy-Authorization allow all
request_header_access Proxy-Authenticate allow all
request_header_access Cache-Control allow all
request_header_access Content-Encoding allow all
request_header_access Content-Length allow all
request_header_access Content-Type allow all
request_header_access Date allow all
request_header_access Expires allow all
request_header_access Host allow all
request_header_access If-Modified-Since allow all
request_header_access Last-Modified allow all
request_header_access Location allow all
request_header_access Pragma allow all
request_header_access Accept allow all
request_header_access Accept-Charset allow all
request_header_access Accept-Encoding allow all
request_header_access Accept-Language allow all
request_header_access Content-Language allow all
request_header_access Mime-Version allow all
request_header_access Retry-After allow all
request_header_access Title allow all
request_header_access Connection allow all
request_header_access Proxy-Connection allow all
request_header_access User-Agent allow all
request_header_access Cookie allow all
request_header_access X-Forwarded-For deny all
request_header_access Via deny all
request_header_access All allow all
any help ?
I need to test the proxy score on the website
Ip-score.com and want it 0 %
Is that possible to let squid don’t modify anything in the request
andseems as not passed from proxy ?
regards
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
http://lists.squid-cache.org/listinfo/squid-users
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
http://lists.squid-cache.org/listinfo/squid-users
