“Required at the inlets” per 14, the engineer is supposed to run the pumper up to that pressure plus friction loss of his hose lay is my understanding.
Mike Morey CFPS 3229 • NICET S.E.T. 123677 Project Manager • Fire Protection Group Shambaugh & Son, LP an EMCOR Company 7614 Opportunity Drive • Fort Wayne, IN • 46825 direct 260.487.7824 / cell 260.417.0625 / fax 260.487.7991 email [email protected]<mailto:[email protected]> [cid:[email protected]] From: George Medina Jr. <[email protected]> Sent: Friday, February 9, 2024 11:45 AM To: Discussion List On Issues Relating To Automatic Fire Sprinklers <[email protected]> Subject: [Sprinklerforum] STANDPIPE PSI SIGNAGE How do you determine the Standpipe augmentation for the FDC Signage. Is it the required Standpipe required PSI minus the city water pressure? Any input or help would be appreciated. Thanks, George Medina Jr. Sr. Fire Sprinkler DesignerSINGLETON ZjQcmQRYFpfptBannerStart Be Careful With This Message The sender's identity could not be verified and someone may be impersonating the sender. ZjQcmQRYFpfptBannerEnd How do you determine the Standpipe augmentation for the FDC Signage. Is it the required Standpipe required PSI minus the city water pressure? Any input or help would be appreciated. Thanks, George Medina Jr. Sr. Fire Sprinkler Designer SINGLETON FIRE PROTECTION INC. This message is for the named person's use only. It may contain confidential, proprietary or legally privileged information. No confidentiality or privilege is waived or lost by any mistransmission. If you receive this message in error, please immediately delete it and all copies of it from your system, destroy any hard copies of it and notify the sender. You must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message if you are not the intended recipient.
_________________________________________________________ SprinklerForum mailing list: https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org To unsubscribe send an email to [email protected]
