I support the WG adoption of draft-filsfilscheng-spring-srv6-srh-compression.
My research activity is related on leveraging SRv6 to implement a containerized 
SFC on Kubernetes.
The new flavors added to the SR endpoint behaviors will be useful to this 
scope, simplifying the processing on each cluster node.
It is quite clear to me they belong to a singe SRv6 data plane.

--
David Lo Bascio
PhD Student in ICT
Department of Information Engineering,
Electronics and Telecommunications (DIET)
Sapienza University of Rome
+39 331 63 51 362
david.lobas...@uniroma1.it



Il 01/10/21 16:04, James Guichard ha scritto:

Dear WG:

The chairs would like to express their appreciation for all the responses received to our emails with reference to how the working group wishes to move forward with respect to a solution for SRv6 compression.

The apparent inclination of the working group is to use https://datatracker.ietf.org/doc/draft-filsfilscheng-spring-srv6-srh-compression/ <https://datatracker.ietf.org/doc/draft-filsfilscheng-spring-srv6-srh-compression/> as the basis for its compression standardization work. That is part of what this email attempts to confirm.

Because of the above the chairs would like to issue a 2-week WG call for adoption ending October 15^th for https://datatracker.ietf.org/doc/draft-filsfilscheng-spring-srv6-srh-compression/ <https://datatracker.ietf.org/doc/draft-filsfilscheng-spring-srv6-srh-compression/> but with some clear guidelines as follows. By expressing support for adoption of this document you are fully aware of and are acknowledging that:

 1. The SPRING working group is adopting a document that has multiple
    SRv6 Endpoint behaviors.
 2. The document is a “living” document; it may change as it goes
    through review and analysis by the SPRING working group.
 3. All open discussion points raised on our mailing list MUST be
    addressed BEFORE said document is allowed to progress from the
    working group to publication. A list of these discussion points
    will be documented in the WG document and maintained by the
    document editor in conjunction with the chairs.
 4. If this document is adopted by the working group, the chairs
    specify as part of the adoption call that the following text
    describing an open issue be added to the document in the
    above-described open issues section:
      * "Given that the working group has said that it wants to
        standardize one data plane solution, and given that the
        document contains multiple SRv6 EndPoint behaviors that some
        WG members have stated are multiple data plane solutions, the
        working group will address whether this is valid and coherent
        with its one data plane solution objective.".

Please consider the above guidelines as you decide on whether to support or not this WG adoption. Please express clearly your reasoning for support/non-support as well as any open discussion points you would like addressed should the document be adopted into the working group.

Thanks!

Jim, Bruno & Joel



--
________________________________________________________
Le informazioni contenute in questo messaggio di posta elettronica sono strettamente riservate e indirizzate esclusivamente al destinatario. Si prega di non leggere, fare copia, inoltrare a terzi o conservare tale messaggio se non si è il legittimo destinatario dello stesso. Qualora tale messaggio sia stato ricevuto per errore, si prega di restituirlo al mittente e di cancellarlo permanentemente dal proprio computer. The information contained in this e mail message is strictly confidential and intended for the use of the addressee only.  If you are not the intended recipient, please do not read, copy, forward or store it on your computer. If you have received the message in error, please forward it back to the sender and delete it permanently from your computer system.
_______________________________________________
spring mailing list
spring@ietf.org
https://www.ietf.org/mailman/listinfo/spring

Reply via email to