Thank you Rishabh! I will contact you regarding Cisco specific questions.
The questions apply to multicast support with SR-MPLS and are not vendor specific however I am using Cisco as an example. >From a IETF standards perspective, I believe the one question that this thread is related is with multicast SR-MPLS support use case where you are migrated to SR-MPLS and LDP has been removed from the SP core. In this customer use case where the customer does not want to use RSVP TE or IR due to replication processing overhead in a distributed model what options are available for multicast support. The SR replication segment tree sid draft states that it can only be used for PCE centralized controller model. I am guessing BIER maybe an option? Any other options for operators? Kind regards Gyan On Sat, Mar 21, 2020 at 1:49 PM Rishabh Parekh <risha...@gmail.com> wrote: > Gyan, > These questions are implementation specific and should be addressed > off the mailing list. Please contact me at ripar...@cisco.com. > > -Rishabh > > On Fri, Mar 20, 2020 at 6:41 PM Gyan Mishra <hayabusa...@gmail.com> wrote: > > > > > > Daniel & Authors > > > > I had a question related to the draft related to lab POC testing. > > > > > https://datatracker.ietf.org/doc/draft-voyer-spring-sr-replication-segment/ > > > > In the draft it states that SR replication using Tree SID to replication > to leafs on a tree is only supported with a centralized PCE controller > based model using BGP LS. > > > > I have an SR-MPLS Cisco VIRL POC test bed using XRV9000 nodes 7.0.1 > using ISIS SR extensions where I have L3 vpn overlay and everything is > working very well from a unicast perspective. No issues. > > > > I have LDP still enabled but via “SR-Prefer” am using SR-MPLS forwarding > plane. I kept LDP enabled so I can use mLDP for LMDT label switched trees > for multicast and technically that all MVPN procedures RFC 6513 6514 encap > tunnel types should work for p-tree using mLDP forwarding plane for > multicast while SR-MPLS is being used for unicast.. > > > > I can get the LMDT core tree default and data mdt to build for MP2MP or > P2MP tree but cannot get on the FEC root the MRIB state to build. Not sure > why? > > > > Any ideas. Is there anything special I have to do for multicast to use > the ldp mLDP extension data plane and not the SR-MPLS data plane. > > > > I think what’s happening is at the data plane forwarding level SR-MPLS > data plane is being used instead of mLDP. > > > > I have a bunch of SR-TE policies in place with candidate dynamic and > static ERO paths and that works well coloring the VRF steering. > > > > I was wondering if I can use SR-TE binding Sid with Static ERO loose > path using prefix SID of egress PE to replicate to and build P2MP tree > instantiation via SR-TE. > > > > Is that possible? > > > > Kind regards > > > > Gyan > > > > > > -- > > > > Gyan Mishra > > > > Network Engineering & Technology > > > > Verizon > > > > Silver Spring, MD 20904 > > > > Phone: 301 502-1347 > > > > Email: gyan.s..mis...@verizon.com > > > > > > > > _______________________________________________ > > spring mailing list > > spring@ietf.org > > https://www.ietf.org/mailman/listinfo/spring > -- Gyan Mishra Network Engineering & Technology Verizon Silver Spring, MD 20904 Phone: 301 502-1347 Email: gyan.s.mis...@verizon.com
_______________________________________________ spring mailing list spring@ietf.org https://www.ietf.org/mailman/listinfo/spring
