----- Original Message ----- > From: "Emre Erenoglu" <ereno...@gmail.com> > To: spice-devel@lists.freedesktop.org > Sent: Sunday, April 17, 2011 1:10:16 PM > Subject: [Spice-devel] vdagent does not start > Dear Developers, > > I have a virtual XP system with the spice channel enabled through the > serial port. The command line that runs qemu has (reduced): > > -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x8 > -chardev null,id=channel0 -device > virtserialport,bus=virtio-serial0.0,nr=0,chardev=channel0,name=com.redhat.spice.0 > -usb -device usb-tablet,id=input0 -spice > port=5900,addr=127.0.0.1,disable-ticketing -vga qxl -device > qxl,id=video1,bus=pci.0,addr=0x7
I think you may need to specify chardev for spice so I would modify: -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x8 -chardev spicevmc,id=channel0,name=vdagent -device virtserialport,bus=virtio-serial0.0,nr=0,chardev=channel0,name=com.redhat.spice.0 -usb -device usb-tablet,id=input0 -spice port=5900,addr=127.0.0.1,disable-ticketing -vga qxl -device qxl,id=video1,bus=pci.0,addr=0x7 with agent and virtio-serial driver installed on guest. > > However, the vdagent services does not start. when I give it a start > control, it reports to start then stop immediately. Here are the logs > I've found: _______________________________________________ Spice-devel mailing list Spice-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/spice-devel
