It should already be installed at /var/dcc/libexec/dccifd (depending on your ./configure parameters). All you have to do is setup the config files at /var/dcc/dcc_conf and /var/dcc/libexec/start-dccifd, then execute start-dccifd and you should be good to go.
Oh, and appears to run faster in our environment than dccproc, since it does not need to be instantiated for each message scanned. Bill ----- Original Message ----- From: "Smart,Dan" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, December 10, 2003 7:57 AM Subject: [SAtalk] Using dccifd instead of dccproc > > The DCC documentation says that the dccifd interface is much more efficient > than dccproc. I see from doing a spamassassin -D that it looks for it. > > Is there any install procedure for dccifd, and should this be the generally > recommended interface for dcc? > > Why or why not? > > TIA > > <<Dan>> > > > > > ------------------------------------------------------- > This SF.net email is sponsored by: IBM Linux Tutorials. > Become an expert in LINUX or just sharpen your skills. Sign up for IBM's > Free Linux Tutorials. Learn everything from the bash shell to sys admin. > Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click > _______________________________________________ > Spamassassin-talk mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/spamassassin-talk > ------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ Spamassassin-talk mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/spamassassin-talk
