Module Name: src
Committed By: kardel
Date: Mon Mar 11 14:35:22 UTC 2019
Modified Files:
src/sys/dev/pci: mpii.c
Log Message:
PR/54045
fix mpii to adhere to physio diagnostic invariant that
fully processed data must not post an error:
1) verify expected scspi state via KASSERT() instead of just
setting the variables.
2) set xs->resid only in known good conditions
3) insure setting errors in all error paths and refrain
from clearing xs->resid in error paths.
While there do some cosmectic clean up:
1) extend and relocate some debug output
2) mpii HBAs can also manage non-disk devices like tapes etc,
so log that physical "devices" instead of physical "disks" are
attached or detached.
Tested with NEOSeries FlexStor II and luckily a broken tape drive 8-(
mpii0 at pci1 dev 0 function 0: vendor 1000 product 00ab (rev. 0x01)
mpii0: interrupting at irq 11
mpii0: HBA 9400-8i8e, firmware 3.0.4.0, MPI 2.6
mpii0: physical device inserted in slot 9
mpii0: physical device inserted in slot 13
mpii0: physical device inserted in slot 16
st0 at scsibus0 target 9 lun 0: <IBM, ULTRIUM-HH7, J4D1> tape removable
st0: density code 92, variable blocks, write-enabled
ch0 at scsibus0 target 9 lun 1: <BDT, FlexStor II, 5.50> changer removable
ch0: 23 slots, 2 drives, 1 picker, 1 portal
st0: tagged queueing
ch0: tagged queueing
st1 at scsibus0 target 13 lun 0: <IBM, ULTRIUM-HH7, J4D1> tape removable
st1: density code 92, variable blocks, write-enabled
st1: tagged queueing
ses0 at scsibus0 target 16 lun 0: <LSI, VirtualSES, 01> enclosure services fixed
Note: pullup-8
To generate a diff of this commit:
cvs rdiff -u -r1.21 -r1.22 src/sys/dev/pci/mpii.c
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
