Module Name: src
Committed By: msaitoh
Date: Wed Oct 4 07:13:00 UTC 2017
Modified Files:
src/sys/dev/pci/ixgbe: ixgbe.c
Log Message:
- Remove half-duplex setting for more than 1000Mbps in ixgbe_add_media_types()
because those medias are not in the spec.
- Add 2.5GBASE-T and 5GBASE-T support. Tested with X550-T1.
Example:
ixg0: flags=0x8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
capabilities=fff80<TSO4,IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx>
capabilities=fff80<TCP4CSUM_Tx,UDP4CSUM_Rx,UDP4CSUM_Tx,TCP6CSUM_Rx>
capabilities=fff80<TCP6CSUM_Tx,UDP6CSUM_Rx,UDP6CSUM_Tx,TSO6,LRO>
enabled=7ff80<TSO4,IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx>
enabled=7ff80<TCP4CSUM_Tx,UDP4CSUM_Rx,UDP4CSUM_Tx,TCP6CSUM_Rx>
enabled=7ff80<TCP6CSUM_Tx,UDP6CSUM_Rx,UDP6CSUM_Tx,TSO6>
ec_capabilities=7<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU>
ec_enabled=7<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU>
address: a0:36:9f:b0:f5:b0
media: Ethernet 2.5GBASE-T full-duplex
status: active
supported Ethernet media:
media 10Gbase-T
media 10Gbase-T mediaopt full-duplex
media 1000baseT
media 1000baseT mediaopt full-duplex
media 100baseTX
media 100baseTX mediaopt full-duplex
media 2.5GBASE-T mediaopt full-duplex
media 5GBASE-T mediaopt full-duplex
media autoselect
inet 172.16.0.1/24 broadcast 172.16.0.255 flags 0x0
inet6 fe80::a236:9fff:feb0:f5b0%ixg0/64 flags 0x0 scopeid 0x1
To generate a diff of this commit:
cvs rdiff -u -r1.102 -r1.103 src/sys/dev/pci/ixgbe/ixgbe.c
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
